psfreedom 支持 3.01固件了

k-fei

英语帝上吧


Hi,

I’ve got some great news for those of you who have not updated your PS3 firmware! I have just succeeded in adding Firmware 3.01 support into PSFreedom. I’ve pushed the latest code to github and you can now download the source and compile PSFreedom for 3.01.
For now, you will need to edit config.h and change the FIRMWARE_3_41 into FIRMWARE_3_01, then recompile. However, I will soon add support for dynamically choosing the target firmware version by simply doing a :
echo 3.01 > /proc/psfreedom/fw_version

I will soon add support for firmware 3.10 and 3.15, so be patient, and you will be rewarded. I would like to thank Klutsh as well as Philippe Hub who helped me achieve this port to 3.01.
The new payload changes are available in the PL3 github and any project/port that is also using PL3 should automatically gain support for the 3.01 firmware.
You will also be able to enjoy some new ‘tools’ in PL3 that will allow you to dump the LV2 kernel as well as the decrypted ELF files of the XMB and other configuration files it uses. The ethernet dumping is also now compatible with PS3 Slim models.

I would like to thank, again, those who have donated. For the others, you can still donate, if you appreciate the work I’ve done.

Enjoy!
KaKaRoTo


原文
http://kakaroto.homelinux.net/20 ... orts-firmware-3-01/.

色域迷踪

真是个好消息啊,可惜现在有几个还保持在3.01啊,真正全固件兼容并且OFW才是王道

wx365

我28定的机器 30号收到 160G 固件还是3.30

pbphn

我的还是3.15，哈哈哈

该用户已被禁言

期待支持3.15

期待支持3.15

niphor

昨天为玩 战神3 刚升级成3.15

umbrellakkk

2.5买来就没动过的表示无压力。