用flash 360刷入xellous以后，PC端访问192.168.1.99无法显示

springyu

为获取CPUKey, 我用flash 360刷入xellous (刷的是xell-2f.bin),  然后用光驱键开机，在PC端用Firefox访问192.168.1.99一直于处loading状态，只能看到标题写着Xellous v1.0, 页面始终显示不出来，在CMD控制台中却可以用Ping 命令ping通192.168.1.99.

连接方式是 XBR 直接通过网线连接 笔记本电脑，后来改用路由器，还是不行

后来Search了一下国外的网站，发现也有人遇到类似的情况

http://www.xboxhacker.org/index.php?topic=15832.0

However I can't get firefox to connect to the address it gives me.  If I plug it into my network it is assigned 192.168.2.9 via DHCP.  I can ping it.  I've installed firefox on 3 different computers on my network.  All can ping but none will pull up that page.  The tab comes up as "XeLLous 1.0" but the page is never displayed.

I also took a patch cable and went directly from my pc to my xbox.  the xbox was assigned 192.168.1.99 and i gave my pc 192.168.1.1, subnet 255.255.255.0 and i put the gateway as 192.168.1.1.  i could ping the xbox but same result with firefox - no page but the name came up as "XeLLous 1.0".  There is no security software installed to be interfering.  One of the computers is plugged into the same hub the xbox is.

any ideas?  the tutorial said to use xell-1f.bin and i did.  should i have used xell-2f.bin?  what is the difference between the two?

hisyou

我用IE直接输入地址就显示了，LZ不妨试试

springyu

IE也试过，不行的，连标题xellous v1.0 也不显示的

hisyou

电脑设置的问题吧，跟360无关
你换个电脑看看

springyu

我用的是windows 7 操作系统，浏览器的话，IE, Firefox, 都试过，不行，看来只能换个电脑试试了，谢谢各位

该用户已被禁言

电脑IP要设置成360IP的网段！
或者两电脑和360都选自动获取！另外建议你直接用网线连接电脑不要通过路由

该用户已被禁言

请问楼主 机器cpukey丢失了 系统刷坏了 没有原始固件 光驱也报废无法提取原始固件key等  这种情况能有什么办法得到主机cpukey？

springyu

回复 26331652 的帖子

你说的对，不过我都试过了，没用，准备换台电脑试试