同样建先光驱，同样操作，为什么其中一台刷LT好2.0显示Write Verify Failed

ps239001

虽然显示Write Verify Failed，但是可以读战争机器3，这样算是成功刷好lt2.0固件了吗

oasispujian

没问题 这样其实也刷好了 不放心 可以再刷一次 这个是JF软件的问题

ps239001

这个光驱刷了3次了，都显示Write Verify Failed。

之前第一台刷好后面显示什么OK，这台干脆来个Write Verify Failed

该用户已被禁言

同问啊，我也一样的出现了Write Verify Failed !
详细如下：
Drive key @ 0xA030 BC5AC1843536547C5A6C3E365DBEF479
Firmware Osig: [PLDS    DG-16D2S        8385]
Firmware is:  iXtreme v1.60-12x-              
Spoofing Target
DVD Key copied to target
Target is LT - ID strings not copied to Target

Target rev is LT 02510C, serial info not copied

Target f/w saved as: Lite_CFW1.bin

Sending Lite-On-Erase request to port 0xC000
..............
Drive returned Status 0x80
........
Device Intro failed!

Sending Lite-On-Erase request to port 0xC000
..............
Drive returned Status 0x80
.................
Device Intro failed!
Sending Vendor Intro to port 0xC000

Serial flash found with Status 0x72

Sending Device ID request to port 0xC000
Spi Status: 0xFF
Manufacturer ID: 0xFF
Device ID: 0xFF
Flash Name:  Unknown type
Flash Size:  n/a
Unknown flash type Write aborted !
Unknown flash type Write aborted !
Sending Vendor Intro to port 0xC000

Serial flash found with Status 0x72

Sending Device ID request to port 0xC000
Spi Status: 0xFF
Manufacturer ID: 0xFF
Device ID: 0xFF
Flash Name:  Unknown type
Flash Size:  n/a
Unknown flash type Erase aborted !

Sending Lite-On-Erase request to port 0xC000
..............
Drive returned Status 0x58
...
Serial flash found with Status 0x72
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name:  MXIC(MX25L2005)
Flash Size:  262144 bytes

Getting Status from port 0xC000
SPi flash found with Status 0x72

Sending Chip Erase to Port 0xC000
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................

Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write Verify Failed !

Getting Status from port 0xC000
SPi flash found with Status 0x72

Sending Chip Erase to Port 0xC000
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................

Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write Verify Failed !

但是主要是放散装光盘进去，一样的可以正常游戏，想不通啊，想不通！！

ps239001

不管这个，可以玩游戏就OK了