- 精华
- 0
- 帖子
- 186
- 威望
- 0 点
- 积分
- 199 点
- 种子
- 5 点
- 注册时间
- 2005-7-22
- 最后登录
- 2020-1-1
|
本帖最后由 yjacg 于 2011-11-12 11:30 编辑
按照教程把iHAS524 B 光驱进行了升级到AL2A并把固件刷写进去（固件是选择了针对iHAS524 B 的固件进行刷写，并成功）。
目前刻录香蕉光盘进入校验时，每次都是到了49%就会出现错误。XGD3分层点设置为：2133520 （刻录XGD3游戏时）。
按照教程设置如下：
Online HyperTuning：打开（Enable）
SmartBurn：打开（Enable）
OverSpeed：关闭（Disable）
所有选项选择以后每次都会单独选择Change。
软件是用Imgburn 2.5.6.0 版本
如下照片是本人软件设置内容。不知道为什么到了49%就会出现错误。希望懂的朋友告知一二。
备注：我用自己的三星刻录机反而到是刻录的很好。不过最近买了一批香蕉盘，三星光驱总是进不了校验画面。因为C4推荐建兴刻录机，所以新买了建兴刻录机。不过所有光盘到了49%肯定出错。
解决方案：
安装SMART-BURN 3.5.5。并如图SMART-BURN3.5.5.JPG一样进行设置。
Imgburn2.5.6.0无需特殊设置。我是把分层点设置为自动获取。并打开了Perform OPC Before Write （因为我是4X刻录的）
SMART-BURN 3.5.5软件下载地址：
http://www.liteonodd.com/tw/serv ... nload/21-smart-burn
注明：我用的是大家所谓的最垃圾的香蕉盘。很多人都说不行。不过说不行的实际是不会的。大家不要听那些人瞎说。
Disc ID: RICOHJPN-D01-67
如下是我刻录的信息，仅供参考！
ATAPI iHAS524 B AL2A (ATA)
Current Profile: DVD+R DL
Disc Information:
Status: Complete
State of Last Session: Complete
Erasable: No
Sessions: 1
Sectors: 4,267,024
Size: 8,738,865,152 bytes
Time: 948:15:49 (MM:SS:FF)
Supported Write Speeds: 4x, 6x, 8x
DVD±R DL Boundary Information:
L0 Data Zone Capacity: 2,133,520
Changeable: No
TOC Information:
Session 1... (LBA: 0)
-> Track 01 (Mode 1, LBA: 0 - 4267023)
-> LeadOut (LBA: 4267024)
Disc Control Blocks Information:
ATAPI
Physical Format Information (ADIP - L0):
Disc ID: RICOHJPN-D01-67
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519
Physical Format Information (ADIP - L1):
Disc ID: RICOHJPN-D01-67
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519
Physical Format Information (Last Recorded - L0):
Disc ID: RICOHJPN-D01-67
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,591
Last Physical Sector in Layer 0: 2,330,127
Physical Format Information (Last Recorded - L1):
Disc ID: RICOHJPN-D01-67
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,591
Last Physical Sector in Layer 0: 2,330,127
Layer Information:
Layer 0 Sectors: 2,133,520 (50%)
Layer 1 Sectors: 2,133,504 (50%)
Performance (Write Speed):
Descriptor 1...
-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 4267023 (0x00411C0F)
-> RS: 16,620 KB/s (12x) - WS: 5,540 KB/s (4x)
Descriptor 2...
-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 4267023 (0x00411C0F)
-> RS: 16,620 KB/s (12x) - WS: 8,310 KB/s (6x)
Descriptor 3...
-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 4267023 (0x00411C0F)
-> RS: 16,620 KB/s (12x) - WS: 11,080 KB/s (8x)
|
本帖子中包含更多资源
您需要 登录 才可以下载或查看，没有帐号？注册
x
|
川公网安备 51019002005286号
楼主
发表于 2011-11-12 09:58 · 江苏
