- 精华
- 0
- 帖子
- 875
- 威望
- 0 点
- 积分
- 901 点
- 种子
- 5 点
- 注册时间
- 2006-8-18
- 最后登录
- 2020-1-5
|
~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.89 Beta (284)
Session Started Thu Jan 12 16:58:54 2012
This is a 32 bit process running on 2 x 32 bit CPUs
portio32.sys Driver Installed
portio32.sys Driver Started, thanks Schtrom !
Found 6 I/O Ports.
Found 1 Com Ports.
Found 4 windows drives C: D: E: K:
Found 1 CD/DVD drives K:
Loading firmware file C:\Users\Administrator\Desktop\Dummy.bin
MD5 hash: 5a3de8268c739720f87424e78539f50f
Inquiry string found
Identify string found
Drive key @ 0xA030 184308685E44930FC1ACF9D8469DB658
Firmware Osig: [PLDS DG-16D2S 7485]
Firmware is: PhatKey Extract
Loading firmware file C:\Users\Administrator\Desktop\Firmware\Firmware\LTPlus-025-v2.0.bin
MD5 hash: 0264149996f783b54629c1598072e50e
Genuine LT plus v2.0
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: LT-Plus 2.0
Spoofing Target
DVD Key copied to target
Target is LT - ID strings not copied to Target
Target rev is LT 02510C, serial info not copied
Target f/w saved as: Lite_CFW.bin
Sending Lite-On-Erase request to port 0x01F0
..............
Drive returned Status 0x0
....
Serial flash found with Status 0x72
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes
Getting Status from port 0x01F0
SPi flash found with Status 0x72
Sending Chip Erase to Port 0x01F0
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................
Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write verified OK !
不知道是什么原因,光驱挂机器上就是不读碟,放进去就是开启光驱。。。。。 |
|