XDG3刻录设置问题，请高手指导！

该用户已被禁言

有时刻盘电压不稳定也是有关系的

heejunwoo1

我不用SmartBurn直接 ImgBurn刻录就行了- 打开 Force HyperTuning
- 打开 Online HyperTuning
- 打开 SmartBurn
- 关闭 OverSpeed
啄木鸟张张能刻,香蕉的到分层点就飞,据教程说100%的刻录对刻录机也很敏感有时候同一型号的建兴刻录机也有截然不同的结果

kiko998

heejunwoo1 发表于 2012-3-21 20:49
我不用SmartBurn直接 ImgBurn刻录就行了- 打开 Force HyperTuning
- 打开 Online HyperTuning
- 打开 Sma ...

啄木鸟我要打开SmartBurn的，我就是不明白到底需要那个设置

heejunwoo1

I 23:07:25 ImgBurn Version 2.5.6.0 started!
I 23:07:25 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)
I 23:07:25 Total Physical Memory: 4,192,432 KB  -  Available: 2,508,924 KB
I 23:07:25 Initialising SPTI...
I 23:07:25 Searching for SCSI / ATAPI devices...
I 23:07:25 -> Drive 1 - Info: ATAPI iHAS524   B AL2A (J:) (ATA)
I 23:07:25 Found 1 DVD±RW/RAM!
I 23:08:35 Operation Started!
I 23:08:35 Source File: H:\TDDOWNLOAD\tv.duowan.com_Ninja_Gaiden_3_JPN_XBOX360-Caravan\Ninja_Gaiden_3_JPN_XBOX360-Caravan\cvn-ng3j.dvd
I 23:08:35 Source File Sectors: 4,267,015 (MODE1/2048)
I 23:08:35 Source File Size: 8,738,846,720 bytes
I 23:08:35 Source File Volume Identifier: DVD_ROM
I 23:08:35 Source File Volume Set Identifier: 6dbec000MS UDFBridge
I 23:08:35 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 23:08:35 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 23:08:35 Source File File System(s): ISO9660, UDF (1.50)
I 23:08:35 Destination Device: [1:1:0] ATAPI iHAS524   B AL2A (J:) (ATA)
I 23:08:35 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67)
I 23:08:35 Destination Media Supported Write Speeds: 4x, 6x, 8x
I 23:08:35 Destination Media Sectors: 4,267,040
I 23:08:35 Write Mode: DVD
I 23:08:35 Write Type: DAO
I 23:08:35 Write Speed: 4x
I 23:08:35 Link Size: Auto
I 23:08:35 Lock Volume: Yes
I 23:08:35 Test Mode: No
I 23:08:35 OPC: No
I 23:08:35 BURN-Proof: Enabled
I 23:08:35 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)
I 23:08:35 Book Type Setting: DVD-ROM
I 23:08:35 Advanced Settings - Force HT: Yes, Online HT: Yes, OverSpeed: No, SmartBurn: Yes
I 23:08:35 User Specified L0 Data Zone Capacity: 2,133,520
I 23:09:05 Set L0 Data Zone Capacity Succeeded!
I 23:09:06 Filling Buffer... (40 MB)
I 23:09:07 Writing LeadIn...
I 23:09:09 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014)
I 23:09:09 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)
I 23:09:09 Writing Layer 0... (LBA: 0 - 2133519)

heejunwoo1

opc忘开了 上次刻的是xgd2  所以改过了

heejunwoo1

I 23:09:09 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)
I 23:09:09 Writing Layer 0... (LBA: 0 - 2133519)
I 23:22:20 Writing Layer 1... (LBA: 2133520 - 4267014)
I 23:35:41 Synchronising Cache...
I 23:35:45 Closing Track...
I 23:35:46 Finalising Disc...
I 23:36:20 Exporting Graph Data...
I 23:36:20 Graph Data File: C:\Users\pual\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS524_B_AL2A_2012年3月21日_23-08_RICOHJPN-D01-67_4x.ibg
I 23:36:20 Export Successfully Completed!
I 23:36:20 Operation Successfully Completed! - Duration: 00:27:44
I 23:36:20 Average Write Rate: 5,360 KB/s (3.9x) - Maximum Write Rate: 5,646 KB/s (4.1x)

kiko998

heejunwoo1 发表于 2012-3-21 23:42
I 23:09:09 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)
I 23:09:09 Writing Layer 0... (LB ...

不是很明白，请说明重点，不好意思