自制升級後不能開機,請大神看一下是不是变砖了

ttt2

請問我是不是刷錯了 RGH2

ttt2

<- Processing secdata.bin ->
reading .\xeBuild\data\secdata.bin (0x400 bytes)
        adding as secdata.bin at raw offset 0x38b0000 len 0x00000400 (end 0x038b0400)

------ checking for Mobile*.dat ------
MobileB.dat found, adding from nanddump.bin
        adding MobileB.dat as type 0x31 at raw offset 0x38c0000 len 0x800 (end 0x38c0800)
MobileC.dat found, adding from nanddump.bin
        adding MobileC.dat as type 0x32 at raw offset 0x38c0800 len 0x200 (end 0x38c0a00)
MobileD.dat found, adding from nanddump.bin
        adding MobileD.dat as type 0x33 at raw offset 0x38c1000 len 0x800 (end 0x38c1800)
MobileE.dat found, adding from nanddump.bin
        adding MobileE.dat as type 0x34 at raw offset 0x38c1800 len 0x800 (end 0x38c2000)
Statistics.settings found, adding from nanddump.bin
        adding Statistics.settings at raw offset 0x3bc0000 len 0x1000 (end 0x3bc1000)

------ adding smc_config.bin ------
adding smc config to offset 0x03be0000, len 0x400

------ finalizing image ------
Fixing up empty FS block entries...done!
Writing FS table to image offset 0x38e0000 len 0x4000 (end 0x38e4000)...done!
fixing up big block LBA numbers in spare...done!
calculating ECD bytes and assembling raw image...done!
remapping 3 blocks
    copying 0x21000 bytes of LBA 0x22 to block 0x1ff...zero fill origin...
        dest block is empty, fixing up LBA and ECD...done!
    copying 0x21000 bytes of LBA 0x6a to block 0x1fe...zero fill origin...
        dest block is empty, fixing up LBA and ECD...done!
    copying 0x21000 bytes of LBA 0xb0 to block 0x1fd...zero fill origin...
        dest block is empty, fixing up LBA and ECD...done!
done!
writing file 'C:\J-Runner v02 Beta (284) Core Pack\001375590607\updflash.bin' to disk...done!
C:\J-Runner v02 Beta (284) Core Pack\001375590607\updflash.bin written OK

---------------------------------------------------------------
C:\J-Runner v02 Beta (284) Core Pack\001375590607\updflash.bin image built, info:
---------------------------------------------------------------
Console   : Jasper (big block)
NAND size : 64MiB + NAND MU area
Build     : Glitch
Xell      : power on console with console eject button
Serial    : xxxxx
ConsoleId : xxxxxxxxxxx
MoboSerial: xxxxxxxxxx
Mfg Date  : 02/02/2009
CPU Key   : xxxxxxxxxx
1BL Key   : xxxxxxxxxx
DVD Key   : ccccccc
CF LDV    : 12
KV type   : type2 (hashed)
---------------------------------------------------------------
    xeBuild Finished. Have a nice day.
---------------------------------------------------------------

ttt2

請問是不是選錯了RGH 便會掛掉
,還是因為坏块沒修好, 我是雙65nm JASPER 256MB
進入不了XELL, 大神救救我啊

cnnyyy000

ttt2 发表于 2013-4-7 18:26
請問是不是選錯了RGH 便會掛掉
,還是因為坏块沒修好, 我是雙65nm JASPER 256MB
進入不了XELL, 大神救救我 ...

把合成的自制固件改名成nandflash.bin放到U盘根目录，把U盘插上主机按光驱出仓键开机进XELL界面刷写。如果不刷写的话再找个xenon.elf放到U盘根目录   

wangluoxi

放心。有备份的固件不会变砖的。估计是你选择合成模式了。
找个电玩店给你硬刷一下即可。XBOX可比PS3劲操多了。

该用户已被禁言

你的是2。0的。。。。

该用户已被禁言

而且还有坏到。。。。。。。。。。

育空

cnnyyy000 发表于 2013-4-7 18:56
把合成的自制固件改名成nandflash.bin放到U盘根目录，把U盘插上主机按光驱出仓键开机进XELL界面刷写。如果 ...

请问xenon.elf哪里找啊