额滴神啊，搞了一下午升级，崩溃的感脚啊【已搞定，附方法，找不到主机的可以看看】

吕克儿 · 发表于 2013-9-16 13:38 · 江苏

我昨天试了半天没搞好，后来火了。。用XP的系统。。竟然瞬间就好了。。

demonized · 发表于 2013-9-19 14:41 · 上海

楼主威武

Draganov · 发表于 2013-10-22 23:07 · 北京

本帖最后由 Draganov 于 2013-10-22 23:23 编辑

E:\XeBuild 1.08>xebuild update -f 16537 -ip 192.168.1.100
---------------------------------------------------------------
xeBuild v1.07.632
---------------------------------------------------------------
---- { Update Mode } ----
setting forced IP to 192.168.1.100
attempting forced connection to 192.168.1.100...success!
connected to Jasper with updsvr version 2 (peek version 2)
sending flash data to console...
file sent OK, awaiting result...success!
Completed in 9s
loading avatar data...
success!
Formatting HDD partition...
success!
Sending avatar files to HDD partition...
socket error sending data (1), 10053
aborting sending avatar data, failed to send SSEP:\20409900\BiometricSetup.xex
sending reboot command...failed
16537_gg_jasperbb.bin image built, info:
---------------------------------------------------------------
Kernel : 2.0.16537.0
Console : Jasper (big block)

		自动登录	找回密码
密码			注册