- 精华
- 0
- 帖子
- 874
- 威望
- 1 点
- 积分
- 1188 点
- 种子
- 7 点
- 注册时间
- 2005-8-25
- 最后登录
- 2024-9-4
|
发表于 2011-7-22 22:44 · 山东
|
显示全部楼层
lygbt 发表于 2011-7-22 03:59
吼吼~最近忙学习好久没上网了~来了才发现~明天搞个1394硬盘盒试试~
1394硬盘盒可以先不用考虑了。SP193作者表示iLinkman的开发遇到了困难。详情请看。
http://psx-scene.com/forums/f19/ ... ex3.html#post894732
07-11-2011,07:37 AM
Unfortunately, I think that I have run into a large issue during development.
Hence, I will have to freeze/slow down development on this project until further notice.
I'll be uploading my final files soon.
Well, after I get my PL-3507 based enclosure (Assuming that I do indeed get one) and run some tests, I'll determine whether I will continue development.
The reason for me freezing development is because the current implementation of iLinkman seems to only work with my Oxford 934 chipset... and (probably) nothing else is compatible (Most of them fail/freeze around the Management Agent initialization phase).
I am tired, and also have other things I would like to do in life before I get conscripted into the army in 2013 (National Service).
Plus it's almost impossible to fix/improve drivers for hardware which you don't have (I only have one enclosure that has an Oxford 934 enclosure, and it works perfectly well with iLinkman).
But I do hope that the issue is really a bug in my implementation (The iLink is rather fast after all...), but I can't seem to find a plausible cause for those failures yet.
简单翻译一下,07-11-2011,07:37 AM
开发遇到了大问题,但还是会放出最终的文件。iLinkman目前只对应Oxford 934芯片组。兼容性问题难以解决。虽然尝试解决但无果。2013年就要服兵役了,在这之前生活中还有其它的事情要做。对应于其它芯片组的驱动几乎不可能完成。Oxford 934芯片组的设备表现的很好。希望这个问题是开发过程中的一个bug,但是我目前找不到解决方案。不过iLink的速度是越来越快了。 |
|