NDS玩家有福啦,不用PASSME,GBA烧录卡也可玩NDS游戏!

该用户已被禁言

今天在网上无意的发现访问[幺幺的任天堂]

nds刷成了flashme内核,刷好后就不用PASSME了!
不知道这么刷,请大家帮忙看看!

还有电影卡2代也可刷,不过都是英文的!





让电影卡二代（M2）运行NDS程序以及用M2刷FLASHME的方法
2005年10月23日05:05星期日 Posted by: 幺幺的任天堂
Archived in: 掌机


GBA MP Firmware updater by Chishm

Finally! Someone has released a firmware update that will allow you to play homebrew NDS games/demos on your GBA MP version 2!!!

Using GBA MP to install FlashMe
Troubleshooting

Thanks Chishm and DarkFader!

This is a picture of the REAL GBA MP version 2. This is what the firmware update is for. If you have bought a FAKE GBA MP, and it didn't come in a box like this, or if it doesn't look like this one, don't use this update!!!



Here's what I did.

Note, if you have update.e19 or are planning on using update.e19, make sure you use Chishm's firmware V2.

Get the files here:FILES
Or for the most current ones from Chishm: FILES

First, copy the flashmp_mb.gba and _BOOT_MP.gba file onto the CF card.



Then, under windows, right-click on the drive letter for your CF card and select properties. I ran the defrag utility and told it to defrag the CF card anyway.




After that, insert the CF card into the GBA Movie Player Version 2 and stick it into your DS.

Then, turn on your DS WITHOUT a PassMe inserted and let it boot into GBA mode.

Next, select "FC Game" from the menu



Then, select flashmp_mb.gba from the list.



You should see the screen below:



Press and hold the L and R buttons, and then press SELECT.

Once this is done, you should see:



Now, remove the GBA MP from your DS, remove the CF from the GBA MP, and copy Omalone.nds (Or any other homebrew .nds file you want) to the CF card.



Next, rename Omalone.nds to _BOOT_MP.NDS



Put the CF card back into the GBA MP, and then insert the GBA MP into your DS.

Next, insert the PassMe into the DS and turned it on. BOOM! There was Omalone!!

Now, if you want to be able to use it as GBA MP, you must leave the _BOOT_MP.gba file in the root directory as well.

VIDEO of Omalone running from GBA MP

A note on using it for development. Currently, it is important that your file is not fragmented. The best way I have found to keep this from happening is to copy your new file onto the CF card, delete the _BOOT_MP.nds and then rename your new file to _BOOT_MP.nds. Using this method, I have not had a problem with my .nds file running. So, I created a .bat file that does this for me, and still have not seen any issues.

You can now purchase pre-flashed GBA MPs from dspassme.com.

Using it to install FlashMe

Borrowed/edited from Chishm:

To use this to flash your DS:
1) Put flashmp_mb.gba, and _BOOT_MP.GBA on your CF card root directory.
2) Start your GBAMP. Go into FC Game and run flashmp_mb.gba. Install the boot loader.
3) Download flashme.nds from http://ds.gcdev.com/dsfirmware/. It must be the .NDS file, not the .DS.GBA file!
4) Put flashme.nds on the root of your CF card and rename it to _BOOT_MP.NDS
5) Use either a passme or wifime to start your DS in NDS mode.
76) Flash your DS according to the instructions on the web site.
8) Remove _BOOT_MP.NDS from your CF card, and replace it with a different game, such as OMalone.nds. Rename the NDS file of the game to _BOOT_MP.NDS.
9) Restart your DS.

Troubleshooting

White Screens, but flashmp_mb.gba installed fine.

1) Try formatting the card.
2) Try defragmenting your card.
Still not working, try this: (provided by Natrium42)

In HexWorkshop:
(1) Open *physical* disk from the menu.
(2) You should now see 0x200 bytes of the first physical sector.
(3) Sellect all of them (CTRL-A)
(4) Go to Edit -> Insert and fill with 0's
(5) Close HexWorkshop, reinsert CF and format with Windows.



  .

终极小兵续集

有突破~~~~等待高手鉴定.............

rei_geo

上周就刷过了,是不需引导和正卡了(用的GBAlink)

该用户已被禁言

续上篇:下载flashme,然后用spritekey引导烧入ez或其他卡带，短接nds的sl1,进行刷机。

终极小兵续集

有没有风险啊?????刷不好怎么样????

amakusa1999

下面是引用终极小兵续集于2005-10-25 13:30发表的:
有没有风险啊?????刷不好怎么样????

无风险
我用别针+衣服夹 成功刷机

艾柯米

还是有点怕................

终极小兵续集

哪天研究研究.......................

remi2003

只要在刷机过程中不断电就没有风险，万一中途断电的话（因为刷机时电池盖要打开，所以存在电池掉出来的可能性），就要恭喜多了一块板砖了。
自己已经刷机了，感觉关键是找好工具，否则等到开始刷以后却发现没办法把SL1顺利连通还是比较抓狂的。