Xenon + Falcon + Jasper RGH 1.2

derick

15432 发表于 2015-5-3 09:13
post photo with matrix

Here they are. Are they both fake?

I don't know why last post don't come with the cpu picture.

15432

short FAT jumpers + solder C wire to CLK on matrix

zhangjiqi007

ace use 150M  or 48M?  all CB ver can work?

拖鞋

lz是真正的大神啊！

wangluoxi

15432 发表于 2015-5-1 20:20
Jasper - 15 / 17 / 21
Falcon - 21 / 27 / 35
Xenon / Zephyr (only CANADA CPU) - 3 / 5 / 7

I'm CANADA CPU.system 16537 . MATRIX . but use Xenon / Zephyr (only CANADA CPU) - 3 / 5 / 7 no work.
Thank you .

derick

15432 发表于 2015-5-5 05:04
short FAT jumpers + solder C wire to CLK on matrix

I will try again and let you know, Thanks. I did use  your picture to solder the wires.

royhao

15432 发表于 2015-5-5 05:04
short FAT jumpers + solder C wire to CLK on matrix

A few days ago to try Jasper 512M RGH1.2，very good

This afternoon tried Jasper 512M,  ACE, RGH1.2, cann't boot, change to matrix, very good, xvsf is rgh12_18, very fast, but replace the ACE, use the same rgh12_18, cann't boot,why？




中文版：

前几天试改了台双65 512M，用的蓝板，RGH1.2，开机非常快，10秒内吧

今天下午又改了台双65 512M，一开始用的ACE，照教程串了22K电阻，死活不开机，后来换成蓝板，刷了RGH12_18，也是非常快，10-20秒内开机，后来不死心，再换回ACE，同样用ACE的RGH12_18，还是死活不开机。。不知道为什么

该用户已被禁言

zhangjiqi007 发表于 2015-5-5 09:47
ace use 150M  or 48M?  all CB ver can work?

8498-17150全支持，也就是无视CB版本。

derick

15432 发表于 2015-5-5 05:04
short FAT jumpers + solder C wire to CLK on matrix

I CAN 'T PROGRAM THE FILE INTO XILINX. BUT THE FILE FROM JRUNNER, WORKS FINE.

Checking Files
Finished Checking Files
Device not found.
XSVF Player v5.02, Xilinx, Inc.
Using InpOut32.dll portio driver
XSVF file = C:\J-Runner v3 (5) Core Pack\zip\zephyr_150_E_1_L_1.xsvf
using base port 0x378

ERROR:  TDO mismatch
ERROR at or near XSVF command #10.  See line #10 in the XSVF ASCII file.
Execution Time = 0.000 seconds

XSVF Player v5.02, Xilinx, Inc.
Using InpOut32.dll portio driver
XSVF file = C:\J-Runner v3 (5) Core Pack\zip\zephyr_150_E_1_L_1.xsvf
using base port 0x378

ERROR:  TDO mismatch
ERROR at or near XSVF command #10.  See line #10 in the XSVF ASCII file.
Execution Time = 0.000 seconds

XSVF Player v5.02, Xilinx, Inc.
Using InpOut32.dll portio driver
XSVF file = C:\J-Runner v3 (5) Core Pack\zip\zephyr_150_E_2_L_1.xsvf
using base port 0x378

ERROR:  TDO mismatch
ERROR at or near XSVF command #10.  See line #10 in the XSVF ASCII file.
Execution Time = 0.000 seconds

Initializing updflash.bin..
Falcon/Opus
Glitch Selected
Nand Initialization Finished
Initializing nand1.bin..
Falcon/Opus
Nand Initialization Finished
Glitch2 Selected
Glitch Selected
Programming Coolrunner
C:\J-Runner v3 (5) Core Pack\common\xsvf\falcon.xsvf
XSVF Player v5.02, Xilinx, Inc.
Using InpOut32.dll portio driver
XSVF file = C:\J-Runner v3 (5) Core Pack\common\xsvf\falcon.xsvf
using base port 0x378

SUCCESS - Completed XSVF execution.
Execution Time = 6.515 seconds

巨大的精灵

bdjoe 发表于 2015-4-24 17:41
哇哈哈,我成功啦!!!
图片:

你好，你是单65的机吗？