[分享]360 Modification Disc v1.6 by FrostyTheSnowman

该用户已被禁言

360 Modification Disc v1.6 by FrostyTheSnowman     
-----------------------------------------------




Features:

- Complete Modding Solution for Samsung/BenQ/Lite-On
- iXtreme v1.6 (12x) Firmware
- 0800 Mode for Samsung/BenQ/Lite-On (thanks to iXtreme v1.6)
- Supports Samsung TS-H943
- Supports BenQ VAD6038
- Supports Lite-On DG-16D2S
- Supports Previously Modded Drives
- Supports Previously Spoofed Drives
- 100% DOS Based Dumping & Flashing
- Supports FAT32 & NTFS Filesystems (WinXP/Vista 32-Bit & 64-Bit)
- Fully Automatic Dumping & Flashing
- Step-by-Step Instructions
- Backup of all drive-related files to HDD




Changes in v1.6:

- Updated all firmware to iXtreme v1.6
- 0800 Mode for Samsung/BenQ/Lite-On (thanks to iXtreme v1.6)
- Added 'Donations' screen, to show my appreciation :)


Changes in v1.53:

- Replaced MTKFlash for DOSFlash
- Improved Samsung Detection

Changes in v1.52:

- Fixed lockup/freezing issues with NTFS drives
- Improved BenQ/Samsung dumping/flashing stability
- Replaced MS-DOS with FreeDOS (more stable)

Changes in v1.51:

- Updated all firmware to iXtreme v1.51
- 100% Support for all PC SATA & IDE DVD-ROM drives

Changes in v1.5 Revision 2:

- Improved dumping/flashing speeds for BenQ/Samsung drives
- Added 'user firmware dump verification' prompt to prevent possible BenQ bricking
- Revised menus and more detailed drive flashing/dumping instructions

Changes in v1.5 (Public Release):

- Initial release




NOTE: This disc requires a VIA VT6421 PCI SATA (or compatible) card
    installed, and an NTFS or FAT32 formatted HDD/partition as the
    'C:' drive for this disc to work properly.

NOTE 2: This disc *might* work with other types of SATA chipsets/cards,
      but it is recommended that you use a VIA VT6421 SATA card.

NOTE 3: USB serial adapters are NOT compatible with this disc!




Usage:

- Make sure you have a VT6421 (or compatible) PCI SATA card installed in your PC

- Burn this ISO, and boot this disc in your PC

- Follow the prompts to mod any Samsung, BenQ, or Lite-On XBOX 360 DVD-ROM drive

- All firmware dumps, modified firmware, and other files related to the drive being
  modified will be placed in the following directories on your 'C' drive:

    Samsung TS-H943 - C:\SAMFILES

    BenQ VAD6038 - C:\BENFILES

    Lite-On DG-16D2S - C:\LONFILES




Disclaimer:

I take absolutely no responsibilty for the use of this disc by anyone. Use at your own risk!




Special Thanks & Credits:

Team HyperX - For the awesome iXtreme v1.6 firmware used by this disc
FreeDOS Project - For the FreeDOS Operating System used by this disc
Winternals - For the NTFSDOS driver used by this disc (NTFS Support)
Dennis Bareis - GETRESP (used to input variables into MS-DOS batch files)
Franck Uberto - XMSDSK (used to create a RAMDISK under MS-DOS)
Geremia, Modfreakz, Podger, Redline99 and Tiros - DOSFLASH
Caster420 - Firmtool (Samsung/BenQ/Lite-On iXtreme firmware generating)
TJ - DVDKey & DummyGen (used to dump firmware for the Lite-On drive)
DuggyUK - For information on El Torito HDD Emulation used by this disc



------------------------------------------------------------------------------------------------------.

该用户已被禁言

下好了，里面的固件貌似是有 Bug 的版本

spring83

哪里可以下载啊？

该用户已被禁言

下面是引用spring83于2009-05-16 20:44发表的:
哪里可以下载啊？

https://bbs.a9vg.com/viewthread.php?tid=1178615

该用户已被禁言

早期下的可能有，不过可以拆包换文件就OK了。。。