- 精华
- 0
- 帖子
- 15990
- 威望
- 0 点
- 积分
- 16325 点
- 种子
- 0 点
- 注册时间
- 2005-9-18
- 最后登录
- 2020-9-29
|
本帖最后由 fatyme 于 2011-10-1 21:31 编辑
鉴于有些人刻录失败
在LT2.0放出之前
暂时等待 看看C4是否能够提出啥新的刻录方法
来解决最后1.7%容量丢失的问题
以下信息截取自 GOW3 RROD RIP 的NFO文件
The actual layerbreak for XGD3 ISOs is 2133520. However, when burning XGD3 ISOs to regular DVD+R DL, ImgBurn will automatically reposition/limit the layerbreak to 2086912 in accordance with the disc's maximum Layer 0 data zone capacity (2,086,912 [LBA: 0 - 2086911]). The LT-MAX feature in LT+ v2.0 will compensate for this and allow you to play XGD3 backups with this wrong layerbreak, and therefore wrong game partition data PSN locations.
In the case of growisofs as instructed below, in order to avoid errors when burning XGD3 to regular DVD+R DL, you may choose to first truncate the ISO to 8,547,991,552 bytes, and burn using a reduced associated layerbreak of 2086912. This should give you exactly the same end result as if you followed the instructions below for ImgBurn on Windows.
INSTRUCTIONS FOR BURNING XGD3 BACKUPS WITH IMGBURN
We recommended that you use the latest version of ImgBurn (v2.5.5.0 at the time of writing, downloadable at http://www.imgburn.com/index.php?act=download). Older versions may handle this process differently and/or give a different set of errors.
Although it is set by default in ImgBurn, please ensure that under Tools > Settings > Write, you have "Layer Break (For DL Media)" set to "Calculate Optimal".
Please ensure that the layerbreak is set as 2133520 in the .dvd file. If you already have the XGD2 (or other) layerbreak value set in ImgBurn, the .dvd of the XGD3 ISO will override that setting and use the proper layerbreak.
As mentioned above, ImgBurn will automatically reposition/limit the layerbreak to 2086912 when burning to regular DVD+R DL discs.
Please see the included imgburn-xgd3-errors.png image for screenshots of the errors you'll encounter in ImgBurn and what to click on in each dialog that pops up.
Step by Step:
1. Choose "Write image file to disc", and after loading the .dvd file, click "Write".
2. ImgBurn will pop up a notice saying that there is not enough space on the disc to burn the image, and asks if you would like to continue anyway. Click "Yes".
3. Another message might pop up saying that optimal layerbreak position exceeds L0 capacity. Click "Yes".
4. An error will then pop up noting that "Set L0 Data Zone Capacity Failed". Click "Continue".
5. The image will begin writing to the disc.
6. Nearing the end of the write process, ImgBurn will pop up an error at around 97% or 98% (this is what we want -- it's intentional!). Click "Cancel".
7. A notice will then pop up asking if you would like ImgBurn to try and perform the "'Close Track/Session/Disc' functions". Click "Yes".
8. Let the disc finalize, and you're done!
INSTRUCTION FOR BURNING XGD3 BACKUPS WITH GROWISOFS
truncate --size=8547991552 xgd3game.iso
growisofs -use-the-force-luke=dao -use-the-force-luke=break:2086912 -dvd-compat -speed=4 -Z /dev/dvd=xgd3game.iso
不再是17XXX
而是 2133520
超过L0最大分层容量
推荐使用imgburn刻录
IMG会自动设置分层点到2086912
即使分层点错误
LT2.0的 LT-MAX 会在读取的时候自动调整
也可以裁剪ISO到 8,547,991,552 bytes 再设置分层点到 2086912
这样刻录就不会弹出下面步骤中的错误 （希望以后0DAY 直接发布裁剪后的ISO
这样刻录和XGD2一样了
非裁剪ISO的刻录步骤：
确认分层点设置为2133520
1、选择烧录镜像 选择DVD文件
2、img 提示容量不足以刻录 选择是
3、又一个提示分层点设置超过L0最大容量 选择是
4、又一个提示 Set L0 Data Zone Capacity Failed （设置L0容量失败 选择继续
5、开始刻录
6、在刻录接近尾声的时候 大致在97%或98% img提示错误 选择取消
7、img提示 是否尝试 'Close Track/Session/Disc' functions （关闭碟片 选择是
8、等待烧录结束
以上是RROD RIP 的GOW3 NFO中提示的XGD3 刻录方式
补上裁剪方法
truncate --size=8547991552 xgd3game.iso
growisofs -use-the-force-luke=dao -use-the-force-luke=break:2086912 -dvd-compat -speed=4 -Z /dev/dvd=xgd3game.iso
没用过这工具 命令行了
补上图片版 来自www. hackfaq. net/xbox360/zapis-xgd3-diskov/
1、 设置分层点 为2133520 （直接使用DVD文件刻录的 可以跳过
不过要确认DVD文件内的分层点是否正确
2、选择DVD文件 或ISO镜像
3、提示空间不足 选是
4、提示分层点位置 超过L0最大容量 选是
5、提示设置分层点失败 选继续
6、在刻录接近尾声时 提示错误 选取消
7、提示是否关闭光盘 选是
|
本帖子中包含更多资源
您需要 登录 才可以下载或查看，没有帐号？注册
x
|
川公网安备 51019002005286号
楼主
发表于 2011-10-1 13:42 · 河北
