- 精华
- 0
- 帖子
- 73
- 威望
- 0 点
- 积分
- 75 点
- 种子
- 0 点
- 注册时间
- 2011-4-9
- 最后登录
- 2012-5-8
|
本帖最后由 如风 于 2011-4-11 16:48 编辑
c4表示,这些被13141刷了的光驱还是可以被刷回来的,
另外也不像一些人说的"0272固件提取不了key",而是还可以再提取出来
对这个我表示疑惑，有证据能表示0272的固件是可以提取出来的嘛？怎么提？
用现有的JF能不能提？还是要等C4在写新的程序？？哪位大大愿意做个小白鼠实验一下吗？
那刷写呢？怎么刷？会不会像破解9504一样，要做新的固件？还是就已经破解的固件就可以刷进去？
以上~~~只是我的疑惑~~~希望高手能指点一二~~谢谢！不针对任何人和组织！！！
*****************华丽分割线*************************
转自：JON.B的新消息：
they are flashing samsung drives as well,i just posted 2 videos as evidence in a previous post.i did this test last night.
http://www.***.com/watch?v=ugOuZ6YBKpU
http://www.***.com/watch?v=iWgtWC6Yr1s
the console REFUSED to update the dash when i disconnected the drive.also,the update gave an error if i tried to update the dash while having the sammy flashed with ix LT.the center green LED would start blinking and the console displayed E64.
flashing the sammy to stock seemed to resolve this problem,as the update was successful in this case.however,after the update (in which the console rebooted about 3 times,clearly flashing the drives fw in the process),when i dumped the samsung,the fw was UNRECOGNIZED by JF (instead of saying "stock" it was blank).
clearly samsungs are affected,they DO get flashed (in order to prepare the drive for xgd3 most likely).im sure hitachi's are flashed as well,but i am unable to test it right now,since i dont have any console with a hitachi which i can sacrifice for the purpose of this test.
this is not speculation,this is a test i personally made last night,which i also filmed in order to have some credibility.if you want,i could upload the fw i dumped from the samsung,after the dash update.
一个国外朋友在刷自己三星光驱的时候碰到的状况：
他的光驱是三星 原本刷的是ix LT固件 在升级13141系统固件的时候发生升级错误中断 然后再打开主机 主机发生E64
然后这位朋友再把自己的三星光驱刷回原本的官方固件 尝试升级后问题解决（之前的E64估计是因为13141升级途中错误 导致该系统刷回官方光驱固件的时候丢失 光驱的固件没有刷入 造成）
等升级完成后 他尝试在JF下读取更新后的光驱固件 JF显示 fw为UNRECOGNIZED 不可识别状态 而不是原本的stock（原厂状态）
判断下来是刷了ix LT的三星光驱 也被影响 13141更新也试图强制刷回三星光驱
*****************华丽分割线*************************
转自：wangluoxi
手头刚拿到1台丢码的双65主机，使用XBOX_360_DASHBOARD_2.0.13141_(BETA)的升级包进行了升级测试。
插入U盘开机后会提示发现新的更新，选确定后，会进行解压，但解压完成之后，就会提示错误。错误代码:3080-3355-1600-2303-c800-0080 |
|
川公网安备 51019002005286号
楼主
发表于 2011-4-11 09:53 · 广东
