A9VG电玩部落论坛

 找回密码
 注册
搜索
12
返回列表 发新帖
楼主: fut888

[求助] [搞定了]请教最老的xbr升级13599

[复制链接]
该用户已被禁言

精华
0
帖子
458
威望
0 点
积分
464 点
种子
5 点
注册时间
2007-10-12
最后登录
2020-1-7
 楼主| 发表于 2011-7-29 15:20  ·  上海 | 显示全部楼层
也把原始固件改名成------ Checking .\mydata\nanddump.bin ------
Loading NAND dump...done!


---------------------------------------------------------------
     fbBuild v0.32
---------------------------------------------------------------
data directory overridden from command line to '13599'
per build directory overridden from command line to 'mydata'
file name overridden from command line to 'updflash.bin'

------ parsing user ini at '.\mydata\options.ini' ------
loading file...done!
pre-parsing and sanitizing
done!
User options.ini loaded, 0x13a bytes in memory
loading cpukey.txt from .\mydata\cpukey.txt
CPU Key set to: 0x7E8BDA93E008C6AB076BAB646CD522EC
loading 1blkey.txt from 1blkey.txt
1BL Key set to: 0xDD88AD0C9ED669E7B56794FB68563EFA sum: 0x983 (expects: 0x983)
Using nonandmu option (ini file)

------ Checking .\mydata\nanddump.bin ------
Loading NAND dump...done!
NAND dump is from a small block machine
NAND dump uses big block controller
parsing dump into user and spare...
done!
decrypting KeyVault at address 0x4000 of size 0x4000
keyvault decrypted OK, will use if no kv.bin is provided
decrypting SMC at address 0x1000 of size 0x3000
SMC decrypted OK, checking for hack
clean SMC found in nanddump.bin, you will need to provide a hacked smc.bin
seeking smc config in dump...found at offset 0xf7c000! Using if no smc config is provided.
MobileB.dat found at page 0x69bc, size 2048 (0x800) bytes
MobileE.dat found at page 0x4e4, size 1536 (0x600) bytes

------ parsing ini at '.\13599\filelist.ini' ------
ini version 13599

ini: label [jasperbl] found
found (1) 'cb_6723.bin' crc: 0xe9292b90
found (2) 'cd_6723.bin' crc: 0x0fcff305
found (3) 'ce_1888.bin' crc: 0xff9b60df
found (4) 'cf_4532.bin' crc: 0xd28ef722
found (5) 'cg_4532.bin' crc: 0x2cc9b951
found (6) 'cb_6750.bin' crc: 0xf7afa8cc
found (7) 'cd_8453.bin' crc: 0x25e0acd0
found (8) 'cf_13599.bin' crc: 0x15a4ae66
found (9) 'cg_13599.bin' crc: 0x8d643839

ini: label [flashfs] found
found (1) 'aac.xexp' crc: 0xa622262f
found (2) 'bootanim.xex' crc: 0x5ebaa67f
found (3) 'createprofile.xex' crc: 0xf53f0259
found (4) 'dash.xex' crc: 0x0377a5b8
found (5) 'deviceselector.xex' crc: 0xa5da5863
found (6) 'gamerprofile.xex' crc: 0x9b97b30f
found (7) 'hud.xex' crc: 0x3bd83963
found (8) 'huduiskin.xex' crc: 0xf7c69840
found (9) 'mfgbootlauncher.xex' crc: 0xf4d1be33
found (10) 'minimediaplayer.xex' crc: 0xcbd3e4a6
found (11) 'nomni.xexp' crc: 0x8099a6af
found (12) 'nomnifwk.xexp' crc: 0x43d15042
found (13) 'nomnifwm.xexp' crc: 0x6c1f328e
found (14) 'signin.xex' crc: 0x013749fb
found (15) 'updater.xex' crc: 0x0d0d3f84
found (16) 'vk.xex' crc: 0xc3707c11
found (17) 'xam.xex' crc: 0x35c77172
found (18) 'xenonclatin.xtt' crc: 0xd5d17ff5
found (19) 'xenonclatin.xttp' crc: 0x7a507ad1
found (20) 'xenonjklatin.xtt' crc: 0xdde4a14c
found (21) 'xenonjklatin.xttp' crc: 0x945b7092
found (22) 'ximecore.xex' crc: 0xa49f0061
found (23) 'ximedic.xex' crc: 0x1d992bfb
found (24) 'ximedic.xexp' crc: 0xf67612f5
found (25) '..\launch.xex' crc: 0x00000000
found (26) '..\lhelper.xex' crc: 0x00000000

ini: label [security] found
found (1) 'crl.bin' crc: 0x00000000
found (2) 'dae.bin' crc: 0x00000000
found (3) 'extended.bin' crc: 0x00000000
found (4) 'secdata.bin' crc: 0x00000000
------ ini parsing completed ------

output name overridden to: updflash.bin

Writing initial header to flash image

------ Loading bootloaders and required security files ------
could not read \bin\payload.bin, using built in payload (0x200 bytes)
reading .\mydata\smc.bin (0x3000 bytes)
reading .\mydata\kv.bin (0x4000 bytes)
reading .\13599\cb_6723.bin (0x9550 bytes) (crc32: 0xe9292b90 ini: 0xe9292b90)
reading .\13599\cd_6723.bin (0x56f0 bytes) (crc32: 0x0fcff305 ini: 0x0fcff305)
reading .\13599\ce_1888.bin (0x5606a b pad 0x56070 b) (crc32: 0xff9b60df ini: 0xff9b60df)
reading .\13599\cf_4532.bin (0x44c0 bytes) (crc32: 0xd28ef722 ini: 0xd28ef722)
reading .\13599\cg_4532.bin (0x2ef40 bytes) (crc32: 0x2cc9b951 ini: 0x2cc9b951)
reading .\13599\cf_13599.bin (0x4450 bytes) (crc32: 0x15a4ae66 ini: 0x15a4ae66)
reading .\13599\cg_13599.bin (0x6590e b pad 0x65910 b) (crc32: 0x8d643839 ini: 0x8d643839)
could not read \bin\freeboot.bin, using built in core (0xd50 bytes)
reading .\13599\bin\patches_jasper.bin (0x92c bytes)
**** ldv line 3 set to 00 f0 type: 14
xell not found in perbuild directory, checking firmware /bin folder
xell not found in firmware /bin folder, checking base path
reading xell-2f.bin (0x38a60 bytes)
reading .\13599\cb_6750.bin (0x9a40 bytes) (crc32: 0xf7afa8cc ini: 0xf7afa8cc)
reading .\13599\cd_8453.bin (0x5780 bytes) (crc32: 0x25e0acd0 ini: 0x25e0acd0)
reading .\mydata\config.bin (0x10000 bytes)
-------------------
checking smc_config
-------------------
extracting config
valid SMC config data found at offset 0xc000
------------------
SMC config info:
------------------
Target temps: Cpu:  80鳦 Gpu:  71鳦 Edram:  73鳦
Max temps   : Cpu:  95鳦 Gpu:  90鳦 Edram:  92鳦
Cpu Fan     : (auto)
Gpu Fan     : (auto)
MAC Address : 00:22:48:38:5a:d9
AVRegion    : 0x00000200 (NTSC-J)
GameRegion  : 0x0101 (NTSC/HK)
DVDRegion   : 2
resetKey    : XXUD
---------------------
Checking ini for smc config data patches
smc patched with ini values
---------------------
SMC patched info:
------------------
Target temps: Cpu:  80鳦 Gpu:  71鳦 Edram:  73鳦
Max temps   : Cpu:  95鳦 Gpu:  90鳦 Edram:  92鳦
Cpu Fan     : (auto)
Gpu Fan     : (auto)
MAC Address : 00:22:48:38:5a:d9
AVRegion    : 0x00000200 (NTSC-J)
GameRegion  : 0x0101 (NTSC/HK)
DVDRegion   : 0
resetKey    : XXUD
---------------------
done!

------ Encrypting and finalizing bootloaders ------
patching payload.bin to load size 0xd50 (0x354 reps)
hack found in smc.bin!
done!

------ Adding bootloaders to flash image ------
Fixing up FS table...done!
Writing zeropair CG patch slot overflow data to sysupdate.xexp1...done!
Writing target CG patch slot overflow data to sysupdate.xexp2...done!

------ adding 26 firmware files ------
reading .\13599\aac.xexp (0x4800 bytes) (crc32: 0xa622262f ini: 0xa622262f)
reading .\13599\bootanim.xex (0x55000 bytes) (crc32: 0x5ebaa67f ini: 0x5ebaa67f)
reading .\13599\createprofile.xex (0xc000 bytes) (crc32: 0xf53f0259 ini: 0xf53f0259)
reading .\13599\dash.xex (0x5e9000 bytes) (crc32: 0x0377a5b8 ini: 0x0377a5b8)
reading .\13599\deviceselector.xex (0x9000 bytes) (crc32: 0xa5da5863 ini: 0xa5da5863)
reading .\13599\gamerprofile.xex (0x1a000 bytes) (crc32: 0x9b97b30f ini: 0x9b97b30f)
reading .\13599\hud.xex (0x1f000 bytes) (crc32: 0x3bd83963 ini: 0x3bd83963)
reading .\13599\huduiskin.xex (0x11000 bytes) (crc32: 0xf7c69840 ini: 0xf7c69840)
reading .\13599\mfgbootlauncher.xex (0x8000 bytes) (crc32: 0xf4d1be33 ini: 0xf4d1be33)
reading .\13599\minimediaplayer.xex (0xc000 bytes) (crc32: 0xcbd3e4a6 ini: 0xcbd3e4a6)
reading .\13599\nomni.xexp (0xd000 bytes) (crc32: 0x8099a6af ini: 0x8099a6af)
reading .\13599\nomnifwk.xexp (0x2000 bytes) (crc32: 0x43d15042 ini: 0x43d15042)
reading .\13599\nomnifwm.xexp (0x5000 bytes) (crc32: 0x6c1f328e ini: 0x6c1f328e)
reading .\13599\signin.xex (0x12000 bytes) (crc32: 0x013749fb ini: 0x013749fb)
reading .\13599\updater.xex (0x8000 bytes) (crc32: 0x0d0d3f84 ini: 0x0d0d3f84)
reading .\13599\vk.xex (0x9000 bytes) (crc32: 0xc3707c11 ini: 0xc3707c11)
reading .\13599\xam.xex (0x217000 bytes) (crc32: 0x35c77172 ini: 0x35c77172)
reading .\13599\xenonclatin.xtt (0x11b000 bytes) (crc32: 0xd5d17ff5 ini: 0xd5d17ff5)
reading .\13599\xenonclatin.xttp (0x18000 bytes) (crc32: 0x7a507ad1 ini: 0x7a507ad1)
reading .\13599\xenonjklatin.xtt (0x1a8000 bytes) (crc32: 0xdde4a14c ini: 0xdde4a14c)
reading .\13599\xenonjklatin.xttp (0x7000 bytes) (crc32: 0x945b7092 ini: 0x945b7092)
reading .\13599\ximecore.xex (0x15000 bytes) (crc32: 0xa49f0061 ini: 0xa49f0061)
reading .\13599\ximedic.xex (0x90000 bytes) (crc32: 0x1d992bfb ini: 0x1d992bfb)
reading .\13599\ximedic.xexp (0x2800 bytes) (crc32: 0xf67612f5 ini: 0xf67612f5)

***** could not read .\13599\..\launch.xex, skipping *****

***** could not read .\13599\..\lhelper.xex, skipping *****

------ adding 4 security files ------
reading .\mydata\crl.bin (0x9e0 bytes)
writing as crl.bin to flash
reading .\mydata\dae.bin (0xad30 bytes)
writing as dae.bin to flash
reading .\mydata\extended.bin (0x4000 bytes)
writing as extended.bin to flash
reading .\mydata\secdata.bin (0x400 bytes)
writing as secdata.bin to flash

------ checking for Mobile*.dat ------
MobileB.dat was found in dump, 0x800 bytes, adding type 0x31
MobileE.dat was found in dump, 0x600 bytes, adding type 0x34

------ adding smc_config.bin ------

------ finalizing image ------
Fixing up empty FS block entries...done!
Writing FS table to image...done!
fixing up big block controller on small block NAND LBA numbers...done!
calculating ECD bytes and assembling raw image...done!
writing file 'updflash.bin' to disk...done!
updflash.bin written OK

---------------------------------------------------------------
updflash.bin built, info:
---------------------------------------------------------------
console  : jasper
NAND size: 16MiB
xell     : power on console with console eject button
CPU Key  : 7E8BDA93E008C6AB076BAB646CD522EC
1BL Key  : DD88AD0C9ED669E7B56794FB68563EFA
---------------------------------------------------------------
    fbBuild Finished. Have a nice day.
---------------------------------------------------------------
该用户已被禁言

精华
0
帖子
458
威望
0 点
积分
464 点
种子
5 点
注册时间
2007-10-12
最后登录
2020-1-7
 楼主| 发表于 2011-7-29 15:26  ·  上海 | 显示全部楼层


本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有帐号?注册

x
该用户已被禁言

精华
0
帖子
458
威望
0 点
积分
464 点
种子
5 点
注册时间
2007-10-12
最后登录
2020-1-7
 楼主| 发表于 2011-7-29 15:27  ·  上海 | 显示全部楼层
原始固件

本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有帐号?注册

x
该用户已被禁言

精华
0
帖子
458
威望
0 点
积分
464 点
种子
5 点
注册时间
2007-10-12
最后登录
2020-1-7
 楼主| 发表于 2011-7-29 20:51  ·  上海 | 显示全部楼层
搞定了
回家用easy 5.32 原始固件,smc 选stock,option去掉 auto detect smc

flash360一刷就好

精华
0
帖子
282
威望
0 点
积分
315 点
种子
5 点
注册时间
2008-9-9
最后登录
2020-4-23
发表于 2011-7-30 08:29  ·  广东 | 显示全部楼层
感谢楼主的指引,我的是XBR8955的,但看了下是新南桥的主板,不知道是否可以按照你的方法刷机?
该用户已被禁言

精华
0
帖子
458
威望
0 点
积分
464 点
种子
5 点
注册时间
2007-10-12
最后登录
2020-1-7
 楼主| 发表于 2011-7-30 13:44  ·  上海 | 显示全部楼层
新南桥没有影响吧,论坛里之前很多都成功了,有说没焊好才会出问题

https://bbs.a9vg.com/thread-1518597-1-1.html

精华
0
帖子
282
威望
0 点
积分
315 点
种子
5 点
注册时间
2008-9-9
最后登录
2020-4-23
发表于 2011-7-31 20:07  ·  广东 | 显示全部楼层
再次谢谢楼主,这下放心了,下星期有时间就开刷!
您需要登录后才可以回帖 登录 | 注册

本版积分规则

Archiver|手机版|A9VG电玩部落 川公网安备 51019002005286号

GMT+8, 2024-11-16 18:41 , Processed in 0.162762 second(s), 12 queries , Redis On.

Powered by Discuz! X3.4

Copyright © 2001-2020, Tencent Cloud.

返回顶部