- 精华
- 0
- 帖子
- 2230
- 威望
- 0 点
- 积分
- 2505 点
- 种子
- 242 点
- 注册时间
- 2008-3-19
- 最后登录
- 2024-11-11
|
发表于 2011-8-2 11:42 · 广西
|
显示全部楼层
你的应该是开机就提示升级无法进行吧?下面帖子中的人也遇到你说的问题了,3楼有升级到13599的具体注意事项和步骤,希望对你有帮助。
http://www.consoleaddiction.com/topic/3403-update-battle/
其中有一些估计对大家有帮助的信息:
3L
-------------------------------------------------------------------------------
W A R N I N G R E A D F I R S T ! ! !
If you have a Slim Liteon Drive 9504 (or flashed as 0272) and update to 13599
your drive will be LOCKED so just proceed to go to that dash version if you
have a replacement board or spare drive to flash back the custom firmware later
If you have a board with lock-unlock switch or capability then you will be safe
at all times
If you are using a "C hinese" unlocked 9504 as spare drive OR you are changing the
IC for an unlocked MT1335WE then better do the update to the dash 13599 first
(before you proceed to replace the IC)
-------------------------------------------------------------------------------
LZ在4L提到了解决办法:
VGC, thanks for reposting, thought I would update this. I didn't follow the instructions and flashed original firmware to TX PCB then tried to update. Reinstalled the original PCB and everything went fine, thanks for your help!
说重新安装原来的PCB可以解决问题,由于入了自制,具体的破解术语就不知道什么意思了 |
|