- 精华
- 0
- 帖子
- 65
- 威望
- 0 点
- 积分
- 71 点
- 种子
- 0 点
- 注册时间
- 2011-7-29
- 最后登录
- 2015-12-17
|
发表于 2011-8-11 09:34 · 加拿大
|
显示全部楼层
回复 mask 的帖子
Determine what fw to use using the drive properties on JungleFlasher.
• For updated phat liteons use the LTPlus-025v1.91.bin file, you’ll see that
your liteon is updated by either the dash version which it will be 13146 or
higher or the drive properties on jungleflasher which they’ll say F/W Rev
0251. If you dont have that, update to latest dash version and flash 1.91
• Don’t confuse the LTPlus-025v1.91 with the LTPlus-0225-v1.91! The first is
for phat liteons while the later is for slim 0225 drives.
• LT+ 1.91 was made in mind with 13599 dash. So it’s recommended to
update to this dash and then flash 1.91
• If loading pre-13146 fw on source JungleFlasher will autoload 1.1. This is
completely normal. If you want to use your old files ensure that xbox is
updated first, then manual load the 1.91 fw and press spoof source to
target
• When spoofing from old fw to new one it IS normal to say serial info not
copied and ID strings not copied to target.
• For the ones that want to flash their 74850C liteon drives to stock use the
1a000 file. Don’t ask why, just do it.
• ALL updated phat lite-on drives can only be dumped with MRA or PhatKey
method. Any other drive can be dumped exactly as before.
• The 13146 update, writes stock fw on all drives except hitachi, all phat liteon drives now become 02510C, 9504 become 0272, all benq drives become
04421C and Samsung are just patched.
• As you already know, VIA chipsets are extremely picky with slim drives, so
it’s recommended to get a x360usb to get the job done.
• 13146 update can’t retrieve your key if you don’t have it on drive.
• Because Microsoft has enabled the write protect on 9504 drives ,which
now are 0272, whenever they want , it is recommended to use the kits as
you can control if they are write protected or not. |
|