单65自制机无法使用VGA线输出画面。。。望高人指点

该用户已被禁言

如题，买的单65自制无任何问题，稳定运行，唯一就是觉得用HDMI锯齿较多，记得以前用VGA没啥锯齿的，想用VGA但是没法设置回去，插VGA线始终没图像。哪位高人指点下，不胜感激！！

该用户已被禁言

自己顶一下，希望有高人能看见，指点。。。[s:249]

htdohk

Booting Your Console

Once fully connected, the console is ready for power. Turn on your display, then press the power button to the left of the USB ports on the front panel of the console. This will launch the console's boot sequence, during which time the TV will display an invalid video signal. When the console has finished the boot sequence, a valid video signal will be sent to the TV and the Xbox 360 Launcher will be displayed.

Note that if the console has completed its boot sequence, but a valid video signal still isn't being received, it may be necessary to reset the video mode. You may use one of the following shortcut button combinations on the controller to quickly set video mode:

•For NTSC-M, left trigger+right trigger+D-pad right (PAL-I 60 Hz (Europe))
•For NTSC-J, left trigger+right trigger+D-pad left
•For PAL-50, left trigger+right trigger+D-pad up (Not supported in the current release)
•For VGA, left trigger+right trigger+D-pad down
Note: The flicker filter is not enabled. As a result, images will flicker on NTSC displays. The flicker will not show up when outputing to HDTV or VGA. The flicker filter will be enabled in a future release.

The first time the console boots, the Xbox 360 Launcher will request that you enter a name for your console. Using the controller, enter a name and then select OK to continue. The Xbox 360 Launcher will display a list of the available applications on the console.

该用户已被禁言

好久了才看到，还是非常感谢答复！！[s:250]