A9VG电玩部落论坛

 找回密码
 注册
搜索
查看: 21700|回复: 49

【右手汉化】xeBuild-GUI-2.04 简体汉化正式版(14699,14717,14719)

[复制链接]

精华
2
帖子
1215
威望
2 点
积分
1497 点
种子
5 点
注册时间
2007-5-3
最后登录
2021-12-27
 楼主| 发表于 2012-3-19 14:34  ·  辽宁 | 显示全部楼层 |阅读模式
本帖最后由 上帝之右手 于 2012-3-21 11:17 编辑

【2.04更新】
********
* 2.04 *
********
- Fixed: Now properly using new xell-reloaded, my mind apparently lied to me and said i had swapped the files in the perm directory, but i apparently only did it in the temporary directory, sorry!
- Added: The app can now also identify CB 1940 as Xenon and will ask you if you want to use CB 7375 for ECC creation
- Updated: Using nitram's new fixed script (previous one didn't like using external CB 7375 nor did it like using CB 1940 it also has CB 6750 problem fixed, so if you have a 6751 CB it'll now be able to build ECC's for that again!)
- Fixed: Error messages are no longer written in the middle of the normal output, it's written at the end like it should be (from python)
- Updated: You can now also build Glitch type freeboot images for xenon :)
** NOTE: This will use CB 1940, if you want to use a different CB version you'll have to manually edit the glitch.ini with both new version to use AND the CRC value, aswell as add the new CB file... **
- Changed: Changed the label of GGBoot/Glitchboot, it's now more obvious for Glitch type users that this is the option they will want to use, it now says "GGBoot (Freeboot for glitch)"
- Added: I can now extract SMC_config on my own (Thanks to RF1911 and cOz)
- Removed: The debug window no longer exists... if you need to check the KV/SMC data in HEX use a hex editor! ;)
- Added: Several more easter eggs, go find them! :D
- Fixed: Forgot to add function to the flash nand button! WOOPS! it now works the way it should ;) (NOTE: this will erase the first 50 blocks then write if the total size is more then 50 blocks)
- Fixed: Several bugs/errors in the nandpro operations window
- Added: You can now make presets for the nandpro operations window, meaning if you don't like my defaults you can set your own (it'll autoload "nandpro.xml" if it exists in the main directory)
- Added: NANDPro operations is now linked to the rest of the app, so everything you do here will be effecing the result aswell, for example, when you build a ECC or BIN
- Changed: Rebuilt NANDPro operations, default settings (which are no longer visuable in the main window) is set to use USB as device and nandpro 3.0a for nandpro version (unless you've put nandpro.xml in the main directory)
- Changed: Nandpro operations is now available to everyone (it is no longer restricted to advanced mode)
- Added: IP Scanner, this feature allows you to scan for your console on your network, useful if you can't see your IP or is just lazy... it only checks a range which is user specified (default is 10 - 100)
- Changed: The nandpro operations window has been rearranged a little, and i've removed some controls and placed them on the settings screen only (those that aren't commonly changed)
- Changed: FUSE.txt is no longer downloaded to Main application directory, instead it's downloaded to a temporary directory and copied to the same directory as your source nand is located in (if it's specified, otherwise it'll ONLY be in the temporary directory: files\temp\ beware that this folder is REMOVED upon completing the build process)

** NOTE: I haven't been able to test everything with Xenon's yet, but it should work just fine, i've tested building images but haven't been able to test the resulting images to make sure that it works properly... **

1、应该是支持 xenon 脉冲了,没机器,没法试!
2、个人合并了前几个版本的文件,支持14699,14717和14719三个版本的合成!

【汉化正式版下载】
http://115.com/file/be2zk3jz#
xeBuild-GUI-2.04-FULL-CN.rar

精华
0
帖子
605
威望
0 点
积分
625 点
种子
7 点
注册时间
2008-2-27
最后登录
2024-4-29
发表于 2012-3-19 14:43  ·  上海 | 显示全部楼层
本帖最后由 hadrian 于 2012-3-19 14:44 编辑

沙发!!!!!!!!!!!!!!!!!!好像还是不支持cb6752和cb6753的

精华
0
帖子
26
威望
0 点
积分
26 点
种子
5 点
注册时间
2005-12-10
最后登录
2024-1-26
发表于 2012-3-19 14:44  ·  河北 | 显示全部楼层
支持xenon脉冲!!谢谢右手了!

精华
0
帖子
1010
威望
0 点
积分
1056 点
种子
0 点
注册时间
2003-12-17
最后登录
2023-9-7
发表于 2012-3-19 21:15  ·  北京 | 显示全部楼层
本帖最后由 format0930 于 2012-3-19 21:21 编辑

我有这种老机器,右手要试验下不?
该用户已被禁言

精华
0
帖子
185
威望
0 点
积分
186 点
种子
0 点
注册时间
2009-3-31
最后登录
2019-12-7
发表于 2012-3-19 21:16  ·  四川 | 显示全部楼层
汉化真是体力活,谢谢分享

精华
0
帖子
406
威望
0 点
积分
445 点
种子
0 点
注册时间
2009-2-23
最后登录
2020-4-23
发表于 2012-3-19 21:57  ·  日本 | 显示全部楼层
為什麼沒有14719的文件?

精华
2
帖子
1215
威望
2 点
积分
1497 点
种子
5 点
注册时间
2007-5-3
最后登录
2021-12-27
 楼主| 发表于 2012-3-19 23:08  ·  辽宁 | 显示全部楼层
國姓爺 发表于 2012-3-19 21:57
為什麼沒有14719的文件?

A:觉得作者可能是要你用新版本文件覆盖老版本文件后就什么都有了,不知道这样说明白不明白?

精华
0
帖子
230
威望
0 点
积分
234 点
种子
0 点
注册时间
2012-3-2
最后登录
2016-10-23
发表于 2012-3-19 23:32  ·  内蒙古 | 显示全部楼层
不错,感谢右手,前排留名

精华
2
帖子
1215
威望
2 点
积分
1497 点
种子
5 点
注册时间
2007-5-3
最后登录
2021-12-27
 楼主| 发表于 2012-3-21 11:17  ·  辽宁 | 显示全部楼层
完整版本发布






征服者

流放者(禁止发言)

精华
0
帖子
5939
威望
0 点
积分
6320 点
种子
28 点
注册时间
2009-11-1
最后登录
2024-4-29
发表于 2012-3-21 11:36  ·  广东 | 显示全部楼层
必须支持.感谢发表!
您需要登录后才可以回帖 登录 | 注册

本版积分规则

Archiver|手机版|A9VG电玩部落 川公网安备 51019002005286号

GMT+8, 2024-5-4 01:00 , Processed in 0.192989 second(s), 19 queries , Redis On.

Powered by Discuz! X3.4

Copyright © 2001-2020, Tencent Cloud.

返回顶部