A9VG电玩部落论坛

 找回密码
 注册
搜索
查看: 3747|回复: 10

Xecuter DIY Corona16 CoolRunner – Free Upgrade 9.6A最新消息

[复制链接]

精华
0
帖子
283
威望
0 点
积分
287 点
种子
5 点
注册时间
2004-11-15
最后登录
2023-6-18
 楼主| 发表于 2012-7-6 12:25  ·  北京 | 显示全部楼层 |阅读模式
WARNING: PLEASE BE AWARE THAT THE XC264A BASED RGH HACK FOR THE CORONA IS NOT VERY RELIABLE AND DOES NOT GLITCH VERY FAST AT ALL. THE HACK IS MADE AVAILABLE SO YOU CAN HAVE A PLAY WITH THIS YOURSELF AND SEE WHAT RESULTS YOU CAN ACHIEVE.

THIS IS WHY WE DESIGNED THE COOLRUNNER 3, IT HAS BEEN FINE TUNED USING A MUCH MORE ADVANCED DESIGN AND GLITCHES VERY RELIABLY AND VERY FAST. WE DO NOT OFFER ANY GUARANTEES OR SUPPORT WITH THE XC264A CORONA HACK.

To get this working on CoolRunner Rev A B or C you simply have to add a 48.000MHz crystal.

If you have Rev A or Rev B remember to remove C15.

It's a bit cheap and cheerful and the hack isn't that good with the limitations of the older gen XC264A hardware but here it is anyway.

The crystal has to be good quality – not some cheap crappy one as it will not work.

These work very well:

http://ie.farnell.com/jsp/search/pro…sp?SKU=1640968



48.000MHz crystal wiring to the CoolRunner:
PIN 1,4 to 3v3
PIN 2 to GND
PIN 3 to B

We have included 6 files with different timings:

tx_corona_0_2.xsvf
tx_corona_0_3.xsvf
tx_corona_1_2.xsvf
tx_corona_1_3.xsvf
tx_corona_2_2.xsvf
tx_corona_2_3.xsvf

The most important point is the CPU_RST – this will make the difference between a 30 second glitch and a 30 minute glitch.

You may want to try using the CPU RESET CLEANER addon that we released – it works very well with RGH1 and RGH2.

We also recommend you try the different wire layouts as per the original CoolRunner instructions.

CoolRunner 3 is in production right now – you will get to see how Slim glitching should be done

Thanks to GliGli & Tiros for the original RGH exploit.

- Team Xecuter

On a side note….

These are the crappy glitch times you should expect (measured with the CoolRunner 3 RATER)

These are cycles – not seconds (1 cycle = 5 seconds). In our opinion it just isn't worth paying for – so we encourage you not to buy a CoolRunner REV C or any other XC642A based glitcher just to do Corona – you will probably be disappointed.

11, 51, 14, 5, 5, 26, 19, 1, 1, 13, 18, 3, 1, 3, 4, 6, 8, 5, 5, 9, 3, 2, 7, 22, 14, 4, 6, 5, 1, 2, 16, 2, 5, 17, 8, 10, 8, 8, 9, 4, 13, 2, 9, 4, 19, 2, 8, 2, 10, 11, 1, 14, 1, 2, 10, 4, 3, 3, 3, 1, 3, 20, 4, 4, 6, 15, 7, 3, 18, 3, 6, 6, 1, 2, 3, 11, 2, 37, 3, 13, 1, 10, 9, 4, 10, 6, 3, 14, 2, 4, 4, 4, 6, 4, 2, 1, 6, 1, 9, 3, 4, 2, 8, 2, 5, 15, 3, 3, 1, 2, 6, 7, 6, 21, 15, 27, 11, 9, 4, 10, 2, 5, 11, 3, 6, 14, 26, 8, 2, 5, 4, 3, 11, 3, 15, 4, 10, 13, 14, 22, 22, 9, 6, 22, 19, 1, 5, 10, 5, 1, 7, 2, 16, 9, 1, 11, 2, 7, 24, 3, 8, 12, 8, 7, 12, 13, 4, 7, 3, 1, 17, 9, 2, 5, 3, 2, 5, 1, 16, 4, 9, 9, 3, 1, 1, 15, 18, 3, 7, 3, 49, 18, 9, 6, 4, 1, 2, 11, 1, 3, 1, 5, 14, 12, 16, 11, 1, 8, 11, 1, 47, 8, 1, 19, 2, 18, 9, 6, 7, 15, 12, 13, 6, 16, 5, 3, 11, 3, 12, 2, 5, 2, 11, 4, 1, 18, 8, 13, 8, 10, 8, 1, 1, 13, 10, 5, 38, 10, 20, 3, 8, 4, 7, 4, 17, 3, 6, 1, 8, 13, 2, 3, 2, 10, 1, 1, 30, 17, 7, 14, 24, 10, 1, 16, 11, 16, 5, 6, 6, 11, 6, 1, 15, 1, 3, 5, 25, 10, 7, 5, 13, 12, 6, 8, 5, 7, 1, 46, 2, 17, 14, 2, 2, 6, 3, 3, 2, 5, 23, 3, 1, 8, 23, 15, 5, 1, 3, 3, 3, 1, 2, 5, 10, 9, 9, 20, 7, 22, 1,

本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有帐号?注册

x

精华
0
帖子
664
威望
0 点
积分
709 点
种子
31 点
注册时间
2007-12-26
最后登录
2024-10-3
发表于 2012-7-6 12:27  ·  山东 | 显示全部楼层
支持一下 期待破解
该用户已被禁言

精华
0
帖子
81
威望
0 点
积分
85 点
种子
0 点
注册时间
2005-3-21
最后登录
2020-1-2
发表于 2012-7-6 12:36  ·  北京 | 显示全部楼层
还是没出货啊~唉~

精华
0
帖子
283
威望
0 点
积分
287 点
种子
5 点
注册时间
2004-11-15
最后登录
2023-6-18
 楼主| 发表于 2012-7-6 12:53  ·  北京 | 显示全部楼层
这个是要自己改脉冲芯片。。。。难道没有看懂? 我下午测试下
该用户已被禁言

精华
0
帖子
81
威望
0 点
积分
85 点
种子
0 点
注册时间
2005-3-21
最后登录
2020-1-2
发表于 2012-7-6 13:08  ·  北京 | 显示全部楼层
最近正打算入360,热切期待~
该用户已被禁言

精华
0
帖子
3851
威望
0 点
积分
3926 点
种子
58 点
注册时间
2004-2-20
最后登录
2024-8-29
发表于 2012-7-6 14:00  ·  广西 | 显示全部楼层
要加晶振啊..................

精华
0
帖子
283
威望
0 点
积分
287 点
种子
5 点
注册时间
2004-11-15
最后登录
2023-6-18
 楼主| 发表于 2012-7-6 14:09  ·  北京 | 显示全部楼层
嗯是的新版本ic都有晶振的,可以按照这个改成篮板用
该用户已被禁言

精华
0
帖子
3851
威望
0 点
积分
3926 点
种子
58 点
注册时间
2004-2-20
最后登录
2024-8-29
发表于 2012-7-6 14:19  ·  广西 | 显示全部楼层
脉冲板都要改还是算了吧 等出货再说,万一把机器烧化了就亏大了

精华
0
帖子
510
威望
0 点
积分
536 点
种子
0 点
注册时间
2012-6-24
最后登录
2014-6-11
发表于 2012-7-6 14:31  ·  湖北 | 显示全部楼层
支持  
盼了很久了

精华
0
帖子
283
威望
0 点
积分
287 点
种子
5 点
注册时间
2004-11-15
最后登录
2023-6-18
 楼主| 发表于 2012-7-6 16:25  ·  北京 | 显示全部楼层
还烧化了。。。无语中,。。。呵呵
您需要登录后才可以回帖 登录 | 注册

本版积分规则

Archiver|手机版|A9VG电玩部落 川公网安备 51019002005286号

GMT+8, 2024-10-4 17:27 , Processed in 0.187814 second(s), 14 queries , Redis On.

Powered by Discuz! X3.4

Copyright © 2001-2020, Tencent Cloud.

返回顶部