- 精华
- 0
- 帖子
- 73
- 威望
- 0 点
- 积分
- 96 点
- 种子
- 7 点
- 注册时间
- 2008-9-20
- 最后登录
- 2021-3-17
|
本帖最后由 rocken 于 2012-11-13 10:52 编辑
请问XDK的360 SLIM主板能直接刷成脉冲自制吗？
这合成ecc时的内容:
* unpacking flash image, ....
ECC'ed - will unecc.
UnECC'ed
* found decrypted CD
* found XeLL binary, must be linked to 0x1c000000
* we found the following parts:
SMC: 3.1
CB_A: 10375
CB_B: missing
CD (image): 12625
CD (decrypted): 8453
* this image will be valid *only* for: xenon
* patching SMC...
Patching Trinity version 3.1 SMC at offset 0x13B3
* zero-pairing...
* constructing new image...
* encrypting CB...
* encrypting CD...
* base size: B0000
* No separate recovery Xell available!
* Flash Layout:
0x0..0x1FF (0x200 bytes) Header
0x200..0xFFF (0xE00 bytes) Padding
0x1000..0x3FFF (0x3000 bytes) SMC
0x4000..0x7FFF (0x4000 bytes) Keyvault
0x8000..0xC0FF (0x4100 bytes) CB_A 10375
0xC100..0x120FF (0x6000 bytes) CD 8453
0x12100..0xBFFFF (0xADF00 bytes) Padding
0xC0000..0xFFFFF (0x40000 bytes) Xell (backup)
0x100000..0x13FFFF (0x40000 bytes) Xell (main)
* Encoding ECC...Done!
------------- Written into output\image_00000000.ecc
|
|
川公网安备 51019002005286号
楼主
发表于 2012-11-13 15:41 · 河北
发表于 2012-11-14 18:07 · 北京
