【原创】终于，remarry 成功了。

derick

ps3是黄了以后修复，光驱不是原配。

菜鸟就不要玩这个了，不是一般的难，搞了2天。很多是case by case。

The steps I done almost are baileyscream's steps.

http://www.ps3hax.net/showthread.php?t=71525

downgrade with Teensy2.0 +++++
---------------------------------------------------------------------------------------------------------------------
Tools and software list
Teensy2.0 +++++.
PS3 Flash Tool v4.7
Downgrade Tool (PS3)
mlt 999 proper downgrader https://mega.co.nz/#!2wNjUZ4b!6VaAMs...bBTWjXaJpsLI7w
rogero 3.55_2
--------------------------------------------------------------------------------------------------------------------------
dump many times the nor with Downgrade Tool (PS3)
check the dumps
path with PS3 Flash Tool v4.7
write the path nand with Downgrade Tool (PS3) (write mode is wirteword)
install QA set system "update debug OFF" to "system update debug ON" （L1+L2+L3+R1+R2+D-PAD DOWN IN SAME TIME)
install FSM.PKG
in recovery mode install rogero 3.55_2
put it in to FSM model.
remarry
exit fsm model.
------------------------------------------------------------------------------------------------------------------------------

1. Download mlt 999 proper downgrader https://mega.co.nz/#!2wNjUZ4b!6VaAMs...bBTWjXaJpsLI7w
2. Install new blue ray drive board
3. Install mtl 999 proper downgrader
4. install QA flag toggle.PKG and FSM.PKG
5. Run the QA flag toggle, Do the key combo, set system "update debug OFF" to "system update debug ON"
6. Put the remarry files on the root of USB stick (inside the above download)
7. PUT remarry USB in the right side port the remarry will run
8. Run the enter FSM
9. You WILL SEE remarring on screen.
9. Remove USB.
10. put the exit FSM file on the root, Delete everything else.
11. Restart ps3
12. Once exited FSM and ps3 is back off than power back.
in my case, everything working fine now.
-----------------------------------------------------------------------------------------------------------------
13. Run the qa flag toggle. Do the key combo to check
14. Install rogero 4.55 in recovery menu ONLY ,(it will de-hash at the same time)
15. Install multiman4.55. And in multuman use the restore drive files
16. You can now update to any cfw

タイムマシン

楼主就顺便翻译一下啊

gundam008

タイムマシン 发表于 2015-4-11 10:02
楼主就顺便翻译一下啊

很简单的啊，

SQUALLZOE

gundam008 发表于 2015-4-12 10:38
很简单的啊，

很好奇那个999的降级固件能在非原配光驱板下成功降级么？我之前只玩过在3.55的固件下光驱配对的，记得运行了两次一定要看到“成功”才行

cdy1212

能把这个mlt 999固件分享一下吗？我下不了这个固件啊，提示出错啊！急需i这固件对码光驱啊

该用户已被禁言

这个是干什么用的？？？？？？

ddmond

没那么复杂，机器首先是要破解过的，然后不管用什么方式，进入工厂模式，再执行对码软件，没问题的话，退出工厂模式，光驱就对码成功了

yj-csc

ddmond 发表于 2016-6-11 10:11
没那么复杂，机器首先是要破解过的，然后不管用什么方式，进入工厂模式，再执行对码软件，没问题的话，退出 ...

就是这么复杂，运行对码软件的前提是降回3.55系统且进入工厂模式，复杂的正是降回3.55的过程。

ddmond

yj-csc 发表于 2016-6-13 11:03
就是这么复杂，运行对码软件的前提是降回3.55系统且进入工厂模式，复杂的正是降回3.55的过程。 ...

降回3.55是前提，不然谈啥对码。

solen

求PS3 Flash Tool v4.7这个，哪位能传一下