- 精华
- 0
- 帖子
- 2278
- 威望
- 0 点
- 积分
- 2683 点
- 种子
- 362 点
- 注册时间
- 2006-10-10
- 最后登录
- 2024-7-21
|
发表于 2016-9-14 19:22 · 广东
|
显示全部楼层
athrun0424 发表于 2016-9-14 15:35 
你也别让我看了,不如你自己先看完我贴的这篇,先自己搞明白好吧?这是hometheaterreview.com撰写的HDR科 ...
HDR10 is built around the SMPTE ST 2084 electro-optical transfer function (again, it's the same as Dolby's PQ), and HDR10 content can have similar specs as Dolby Vision content in terms of brightness and color, although the HDR10 profile only lists 10-bit color versus Dolby's 12-bit color. [Editor's note: The original version of the story said that the mastering target for HDR10 is 1,000 nits, but we were informed by a respected source that Dolby Vision and HDR10 are essentially mastered in the same way in terms of nits. It's really dictated by the capabilities of the mastering monitor. Some of the first HDR10 titles were mastered at 4,000 nits, while others were around 1,000 to 1,200 nits.]
The major difference is in how the content is handled at the display end. The HDR10 approach doesn't dynamically map content based on the specific brightness and color output capabilities of a certain TV the way Dolby Vision can, and there isn't a set algorithm to ensure that the color is remapped the same way on every HDR10 display. So, in general, HDR10 is less precise. How that plays out in the real world depends on the specific capabilities/limitations of your TV. |
|