- 精华
- 0
- 帖子
- 405
- 威望
- 0 点
- 积分
- 416 点
- 种子
- 5 点
- 注册时间
- 2008-10-16
- 最后登录
- 2023-8-1
|
发表于 2017-6-8 11:46 · 江苏
来自手机
|
显示全部楼层
To boot the system for the first time you have to use one from the following - sometimes only one way of doing this works!
Terminal Emulator: boot to Android, insert SD card/USB drive with LE, install Terminal Emulator app (either from Google Play or APKMirror), run it and type reboot update. Your box should reboot to LE.
toothpick method: disconnect the power supply, insert card/drive, push reset button and connect the power while holding the button. Wait until LibreELEC logo appears and release the button.
menu button method (works with very few devices): disconnect the power supply, insert card/drive, push menu button on your remote control and connect the power while holding the button. Wait until LibreELEC logo appears and release the button.
recovery method: boot into Android, insert card/thumb drive and choose Reboot to recovery. Your box should boot into LibreELEC.
recovery method (2nd variant): if you have "Update" app pre-installed open it, insert SD card with LE/connect USB drive, and choose any ZIP file in the app for update. Your box should reboot to LE.
recovery method (3rd variant): enable ADB (Google it) and issue adb reboot update command |
|