- 精华
- 0
- 帖子
- 7599
- 威望
- 0 点
- 积分
- 8195 点
- 种子
- 246 点
- 注册时间
- 2015-2-13
- 最后登录
- 2025-2-26
|
You can use next program to flash ESP8266 chip. This application is available for Windows x86, Windows x86_64, y MacOSX.
https://github.com/marcelstoer/n ... r/releases/tag/v3.0
1.- Download firmware from this repository.
2.- Download and Run the pyflasher Application you can download from the link above.
3.- Select the firmware.
4.- Select the COM port.
5.- Program the flash memory of the ESP8266 chip.
6.- Once finished, wake up your Nintendo Switch.
7.- Go to Settings.
8.- Select Internet.
9.- Select Internet Setup
10.- Choose SWITCHWIFI network.
11.- Try to connect.
12.- When the connection fails touch on Continue.
13.- In the new window, choose, only for the first time, INSTALL option.
14.- When it crashes, which is completely correct, reboot your device.
15.- Repeat the steps, but next time choose RUN instead INSTALL.
16.- Follow screen instrucctions.
17.- When the last popup dialog appears saying you have to close that window, click OK to Close it.
18.- Wait for 5 seconds and press once the home button in the joycon.
19.- Apparently it won't respond. But it's ok. It will do it in 6 seconds more or less.
20.- Once in the home screen, select Album again. You should see Homebrew screen.
https://github.com/RetroGamer74/ ... 0_Switch_Pegaswitch |
|