- 精华
- 0
- 帖子
- 8447
- 威望
- 0 点
- 积分
- 8589 点
- 种子
- 10 点
- 注册时间
- 2004-5-27
- 最后登录
- 2024-1-1
|
引用:Xtreme firmware 5.3A,5.3B,5.3C,5.3D for TS-H943 Xbox 360
------------------------------------------------------
Disc-Jitter, Disc-Lockon, Single Layer!, FirmGuard, Multi Speed, Media Stealth, One Firmware, Xbox 360 backup and extraction firmware modification!
Features
-----------------
(v5.3) Disc-Jitter added for Challenge Types 5/7 to avoid possible replay detection.
(v5.3) Support added for DVD drive to Report as Hitachi 79
Technical details
------------------------
Disc-Jitter is slight randomization added to the result of Challenge types 5 and 7 so as to emulate a result from an actual physical drive.
This is to avoid any possible replay detection.
...
...
...
For Xtreme 5.3C all backup Read Speed is same as original game disks 12x. Originals unaffected and no speed switch
For Xtreme 5.3D all backup Read Speed is quite/slow. Originals unaffected and no speed switch
...
...
...
FOr Xtreme 5.3A backup Read Speed is always same as original game disks 12x. Original discs unaffected
FOr Xtreme 5.3B backup Read Speed is always quiet/slow. Original discs unaffected.
FOr Xtreme 5.3C default backup Read Speed is same as original game disks 12x. When Original Game disk is booted, all subsequent backup loading will be at Quiet/Slow Read mode, Original Game disks are unaffected. Turn console off/on to reset back to Default backup read speed (12x). Quiet/Slow Read Speed is for quiet operation and/or cheap DVD+R DL media.
FOr Xtreme 5.3D default backup Read Speed is Quiet/Slow 2-4x. When Original Game disk is booted, all subsequent backup loading will be at Fast Read mode 12x, Original Game disks are unaffected. Turn console off/on to reset back to Default backup read speed for backups (2-4x).
...
...
...
Flashing your drive
---------------------------
For ms28 firmware versions of drive you will need to use the Vcc method or the VIA SATA 10 sec method to read/write flash. Refer to http://forums.xbox-scene.com/index.php?showtopic=535222
Advisable to make a backup of your dvd drive firmware first.("mtkflash r /m orig.bin")
In Windows, copy orig.bin to same directory as this release (same directory as ReadMe.txt and X360SAM.exe)
Double click "Make Xtreme firmware.cmd" and follow the prompts. Thanks to eXOBeX for X360SAM.EXE
Copy x53x.bin to boot disk where x is a,b,c or d.
Power off PC
Plug SATA cable from DVD drive to PC. Power cable drive still connected to Xbox 360
Power on Xbox 360
Power on PC
Boot with standard dos boot disk with included mtkflash utility
Run "mtkflash w /m x53x.bin.bin" where x is a,b,c or d.
Flashing your drive with Xtreme4.x or above firmware installed
----------------------------------------------------------
Plug SATA cable from DVD drive to PC. Power cable drive still connected to Xbox 360
Power on PC
Boot with standard dos boot disk with included mtkflash utility to dos
Power on Xbox 360
Insert Enable0800 disc into drive and wait 10 seconds then eject disc
Run mtkflash as per normal.. |
|