请教!!!!!!!用D-LINK DI-624+A无线路由器不用神卡能上KAI吗!!!!!!!!

断线傀儡

小弟刚买了台D-LINK DI-624+A无线路由器,不知道不用神卡能不能上KAI,有人说能,有人说不能,求助啊!!!!!!!!!!!!!!!!!!! [s:252].

coybb

同问,这个KAI不知道是什么原因,呵呵, DS和WII都能支持的

天神十三煞

呃 到KAI的官方去看看支持列表

天神十三煞

呃 到KAI的官方去看看支持列表

playcmer

百分百不能，只有少数能刷DD-WRT的firmware的路由器才能。而且还要刷psp专用的FW才行。

playcmer

DD-WRT Hardware Support Notes
-----------------------------
Note: Please read the flashing notes relevant to your hardware.

1.) DD-WRT supported/tested router hardware versions
Router:          Serial Number prefixes:
Linksys  WRT54G 1.0  CDF0xxx or CDF1xxx
Linksys  WRT54G 1.1  CDF2xxx or CDF3xxx
Linksys  WRT54G 2.0  CDF5xxx
Linksys  WRT54G 2.2  CDF7xxx
Linksys  WRT54G 3.0  CDF8xxx
Linksys  WRT54G 3.1  CDF9xxx
Linksys  WRT54G 4.0  CDFAxxx
Linksys  WRT54G 5.0  (JTAG only with cfe update, see http://wrt-wiki.bsr-clan.de/inde ... ur_Version_5_WRT54G)
Linksys  WRT54GL 1.0  CL7Axxx
Linksys  WRT54GL 1.1  CL7Bxxx

Linksys  WRT54GS 1.0  CGN0xxx or CGN1xxx
Linksys  WRT54GS 1.1  CGN2xxx
Linksys  WRT54GS 2.0  CGN3xxx
Linksys  WRT54GS 2.1  CGN4xxx
Linksys  WRT54GS 3.0  CGN5xxx
Linksys  WRT54GS 4.0  CGN6xxx

Linksys  WAP v1.0 (micro only)
Linksys  WAP v2.0 (micro only)
Linksys  WAP v3.0 (micro only)

Linksys  WRTSL54GS   CJK0xxx

Linksys  WRT300N v1 (v24 only)

Allnet  ALL0277
Buffalo  WHR-G54S
Buffalo  WHR-HP-G54
Buffalo  WZR-HP-G54
Buffalo  WBR-G54
Buffalo  WLA-G54
Buffalo  WBR2-G54
Buffalo  WBR2-G54S
Buffalo  WZR-RS-G54
Buffalo  WZR-G300N Mimo / Nfinity (v24 only)
Belkin  F5D7130/7330 (2mb flash)
Belkin  F5D7230-4 v1444 (2mb flash)
Belkin  F5D7230-4 v1000
Belkin  F5D7231-4
ASUS    WL500G-Deluxe
ASUS    WL500G-Premium
ASUS    WL-300g
ASUS    WL-500g

Motorola WR850G/GP    --> see flashing notes below
Siemens  Gigaset SE505  --> see flashing notes below
Siemens  Gigaset SX550i --> same as SE505
Ravo    W54-RT      --> see flashing notes for SE505 v1 (identical to SE505 v1)
Askey   RT210W      --> see flashing notes for SE505 v1 (identical to SE505 v1)


3.) Linksys WRT54G/GS (any version) flashing notes:
---------------------------------------------------
-For upgrading from the original Linksys firmware, please use the generic mini version (dd-wrt.vXX_mini_generic.bin) and flash it from the web GUI interface.  After this first flashing you can change to any other distribution, if you want.
-For flashing via the web GUI interface, always use the included 'generic' binaries. The other Linksys router specific binaries are only meant for tftp upgrades.


4.) Motorola WR850G flashing notes:
-----------------------------------
-Just use the dd-wrt.v23_mini_moto.bin for initial flashing of the motorola device using the boot wait state.
-WARNING: Never, and I say never try to clear the nvram by the mtd utility. (mtd erase nvram).  This will also delete your hardware MAC adresses which aren't stored in the CFE like in other routers.
-DD-WRT itself prevents this if a Motorola router is detected, but the commandline mtd utility can still brick your router in this case

5.) Siemens Gigaset SE505 Flashing notes:
---------------------------------
-For flashing the Siemens Gigaset SE505, you have to use the dd-wrt.v23_mini_generic.bin with boot tftp on 192.168.2.1
-Since the Siemens default settings do not fit to the Linksys/dd-wrt settings you must additionally check your configuration details after flashing.