- 精华
- 27
- 帖子
- 19830
- 威望
- 53 点
- 积分
- 30386 点
- 种子
- 0 点
- 注册时间
- 2007-3-22
- 最后登录
- 2024-9-7
|
发表于 2007-9-20 18:44 · 澳大利亚
|
显示全部楼层
360皮很厚, 外冷不等于内冷呢... 不是要等上10分种才出问题吗? 那10分钟就是加热了.
ANA 芯片是可以换的, BGA换一颗.
更新:
有个老外有跟楼主你一样的现象, 画面先是又绿又紫, 重起后就没画面但有声音, 结过他当三红的来修, 修好了.
I have this problem with my system. At first the screen would go green and purple, then after a reboot no video but sound is there, and the unit boots up with no errors.
I have done the x-clamp mod and that worked for a while but had to do the towel trick to get it working. I have also done the penny mod but still had problems.
The last one I have tried is the heat gun method and so far it's been ok, but I only did this a few days ago.
I "think" it's a problem with the solder on the GPU and reheating makes a better connection a least for a while. My guess is the last fix I made won't last forever and it will eventually die, hopefully with the 3 red lights so I can get it replaced.
But if you cannot send the unit in I would try the heatgun approach for sure.
Mr Norts
|
|