- 精华
- 4
- 帖子
- 10895
- 威望
- 6 点
- 积分
- 12716 点
- 种子
- 5 点
- 注册时间
- 2005-8-10
- 最后登录
- 2022-2-5
|
这是个超级改装作品，当你已经看惯了Wii的默认模样，你或许可以看看这个改装作品，这个带红帽的，留着胡须，大鼻子的可爱水管工人直接附上了Wii的外壳，同时还有可爱的小乌龟，这一切都靠你一手打造，同时背后还有一个水管可以容纳你的Wii手柄，真的是设计的非常完美。
有兴趣的威乐不妨参照以下的英文制作教程，试着DIY自己的爱机：
step 1 Things NeededYou will need:
A Wii
Tri wing / Phillips screwdriver
Bondo / silicone mold
Clay
Some piping
Wiimote Charger
wire, solder, soldering iron, usb male & female
paint
And some Balls to take apart your Wii!
step 2The main partModding the baseFirst I thought of a design and added things to it over about a week, so I was sure I got everything I wanted. The base has a Wiimote charger, extra usb port in front, and usb connector to the console.
I bought a cheep charger form Toys "R" Us about $20 and took it apart to get the good stuff. Then moved the contacts for the Wiimote into my Mario bros pipe, and made a custom mushroom for the color changing led that indicates the charge status. Lastly I sculpted the ascetics with clay then molded them with the silicone and made casts with Bondo so they are identical.
step 3Adding the Electronics First I had to take apart the Wii you can find the steps here, keep everything organized it will help later, then find a spot to place the female usb port inside the Wii. The best spot looked to be behind the vent on the bottom. I then J-B welded it into place.
Next when the J-B weld hardened I put the male usb port in it, cut a hole in the base and placed the Wii case in its stand. Then J-B welded that usb in the base, so I was sure that their was a good fit.
After that I cut a slot in the front of the base and installed another female usb port. This way you have access to a usb port in the front instead of the rear of the Wii.
step 4 Connecting the Electronics
This is where it counts!! Hooking the components up and making sure it works. When I took apart the charger I noted which wires were hooked up to what and simply reconnected them. Taking a look at the Wii board I found the usb ports and hooked up the wires as in the following pics.
step 5 Primed and Painted
Finishing up, I painted my 3d Mario and planed to recreate some scenes from Super Nintendo's Super Mario All-Stars. I originally wanted to do NES Super Mario Bros, but it would have looked to pixelated and only have a few colors. I first painted the base then the Wii case. Many, many hours of mixing colors and hand painting was put into this Wii and I'm happy with the results. The way it works, is that when the Wii is on or is in standby the charger is activated. When the Wii is off, so is the charger.
 . |
|
川公网安备 51019002005286号
楼主
发表于 2008-3-12 23:15 · 云南
