- 精华
- 1
- 帖子
- 770
- 威望
- 1 点
- 积分
- 1155 点
- 种子
- 42 点
- 注册时间
- 2008-4-5
- 最后登录
- 2023-12-28
|
楼主 |
发表于 2020-6-22 14:25 · 北京
|
显示全部楼层
本帖最后由 ffxfaxz 于 2020-7-12 22:09 编辑
解压缩用7zip
https://www.7-zip.org/
-----------------------------------------------------------------------------
* QUICK GUIDE
0. Open the flashing software. (Folder 1.05.02, MainApp.exe)
1. Remove the bottom cover of the console. You should remove all the black rubbers.
2. Connect a USB Type C to port two of the mini, the another end to the PC (do not use the usb c provided with the bundle).
3. The power cable to the mini
4. Get rid of static (touch something metallic with your fingers)
5. Hold down the button on the motherboard (its close to black-red wires!) and without releasing it press the power button on the console.
6. Release when the USB connected windows warning sounds and or the button down turns green on flashing software
7. Go to the device manager. The new device appears as unknown.
8. Right-click, update driver, manually search for the pack driver. (Driver folder)
9. Select the image when asked to do so or press the button with two arrows to select it manually (linux_gl5201_vlc_v6_rgb.fw) and in "advanced" make sure that it has generated the fields correctly and they are in its folder
(Fat misc partition with misc.img, System partition with system.img, vendor apk partition with vendor.img).
The fields above, plus format data partition, format cache partition, production and flash erase must all be checked.
11. Click on Down (write) and a progress bar will appear. If is not in your screen, scroll down and will appear in a lower position. (It takes around 7.2 minutes to flash it completely)
Steps 7 and 8 are required only on first installation.
Please do not unplug the cord cable while flashing, you can do a brick of your NeoGeoMini.
There is no guarantee on that process. Use at your own risks.
Have fun!
SNK Forever !!!
|
|
川公网安备 51019002005286号
发表于 2020-6-22 15:14 · 安徽
