[求助]xbox360刷机运行DOS，找不到360光驱

该用户已被禁言

技嘉主板，主板的SATA接口平时都不用，电脑的硬盘和光驱都是用的PATA。
连接没有问题，360光驱正常弹出，绿灯闪烁
我是新人，还望各位老大指点一二.

guanqq_64

什么芯片组的主板?

该用户已被禁言

intel的。。。。。。。。。

guanqq_64

INTEL的哪个?要是P35 P45以上的不能刷 865级别的可以刷

该用户已被禁言

楼上的朋友，我的是G33的

guanqq_64

PCISATA:

In the UK, gethttp://svp.co.uk/products-solo.php?pid=1248confirmed working
(Newlink 2-Port Serial-ATA PCI Card (1-Int / 1-Ext))  Thanks for testing, ThraXed!

VIA VT 8237 WORKS
VIA VT 6421L WORKS(with edited mtkflash)
Nforce 410 chipset (mcp51) WORKS (with edited mtkflash)
Download Nforce 410Edited MTKFLASH  (Thanks Grim187,elitedev & will5)
Sil3112 Chipset  Does not work
Sil3114  Does not work
Sil3512 (CompUsa)  Does not work
Maxtor SATA card w Promise chipset (free with hard drives) Does not work



Onboard SATA:

MSI k7n2 delta (Promise SATA) - Does not work

ASUS with sil3114 Controller (ICH6)- Compatible for some?

VIA Chipset - Compatible
Intel Chipset (ICH5 / ICH6) Compatible
ASUS p5ad2 premium (with ich6) - Compatible
Intel Chipset ICH7) - Compatible with hex-edited mtkflash?
Promise Sata controller on the ASUS P4C800E-Deluxe - Compatible, not HDD
NF4SAT1 nForce 4 SATA Controller -Compatible with proper Mtkflash
Abit NF7-S2GNnforce2 SATA (mapped as IDE ports 3+4) - Compatible


SATA NOTES:

Mtkflash.exe  must have the Xbox360 Drive on a SATAchannel, not an ide channel (ie not with SATA-to-IDE converter).

Mtkflash cannot flash via a USB orFirewire connection (DOS doesn't have drivers!)

Mtkflash has the following support documented inside the compiled executable:
  ICH5, ICH6P, ICH6,ICH6M, VIA8237,Si3114, SiS964, SiS180, SiS965, NV nForce3

Make sure your SATA ports are set to NATIVE/IDE mode NOT RAID

Youcan hexedit Mtkflash to modify support for which channel, etc.theapplication scans. This differs by machine/card/controller, so thisisobviously only something more advanced users can do.


WARNING:If you are going to connect your 360 and PC together in *any* way,thenyou *must* provide the 360 with a path to true earth ground. Thisisbecause the 360 has a floating ground and horrible things happen ifallconnected systems do not agree on the reference voltage. I used acouple ofcroc clips from the chassis of the 360 to the chassis of my PCto achieve this.

guanqq_64

DosFlash and DosFlash32 V1.3 Beta
-----------------------------------
- BenQ optimization in unlocking the flash chip, it should now be possible to read/write/erase
  the flash without any soldering or wire tricks, the drive is polled for the correct mtk
  unlocking status after power on, this only works on VIA cards and NForce boards
- DosFlash32 is now available in two versions, the "EnableDrives" version enables the drives in
  device manager after flashing, this could give BSOD on some systems
- better support of Intel chipsets, drives can now be flashed if the controller is not set to
  native mode in the BIOS
- the following controller list includes vendor and device IDs that are hardcoded to identify
  the controller type (IDE or SATA), this is needed if the BIOS uses IDE ports like 0x01F0 or
  0x0170 as SATA and not as IDE channels
- the following chipset support is added
  - VIA cards
   - all VIA cards with a 6420 chipset
  - IDE Controllers
   - NVIDIA nForce 2 IDE Controller
   - NVIDIA nForce 4 IDE Controller
   - Intel ICH9
   - Intel ICH (i810,i815,i840)
   - Intel ICH0
   - Intel ICH2M
   - Intel ICH2 (i810E2,i845,850,860)
   - Intel C-ICH (i810E2)
   - Intel ICH3M
   - Intel ICH3 (E7500/1)
   - Intel ICH4 (i845GV,i845E,i852,i855)
   - Intel ICH5
   - Intel ESB (855GME/875P + 6300ESB)
   - Intel ICH6 (and 6) (i915)
   - Intel ICH7/7-R (i945, i975)
   - Intel PIIX3 for the 430HX etc
   - Intel PIIX4
   - Intel PIIX4 for the 430TX/440BX/MX chipset
   - Intel PIIX
  - SATA Controllers
   - NVIDIA nForce 4 SATA Controller
   - NVIDIA nForce 2 SATA Controller
   - NVIDIA nForce 3 SATA Controller
   - NVIDIA nForce MCP04 SATA Controller
   - NVIDIA nForce MCP51 SATA Controller
   - NVIDIA nForce MCP55 SATA Controller
   - NVIDIA nForce MCP61 SATA Controller
   - Intel 82801EB (ICH5)
   - Intel 6300ESB (ICH5)
   - Intel 82801FB/FW (ICH6/ICH6W)
   - Intel 82801FR/FRW (ICH6R/ICH6RW)
   - Intel 82801FBM ICH6M
   - Intel Enterprise Southbridge 2 (631xESB/632xESB)
   - Intel 82801GB/GR/GH (ICH7, identical to ICH6)
   - Intel 2801GBM/GHM (ICH7M, identical to ICH6M)
   - Intel SATA Controller IDE (ICH8)
   - Intel Mobile SATA Controller IDE (ICH8M)
   - Intel SATA Controller IDE (ICH9)
   - Intel SATA Controller IDE (ICH9M)


The following only applies to a software flash on a locked flash. The methods have been tested
with the BenQ and the Sammy. The VCC trick will work on any motherboard, but you need to do
some soldering and cut traces.


Flashing the BenQ with a VIA card and DosFlash16

guanqq_64

看看你的南桥芯片在不在这里面 还有确定下自己刷新的手法和工具的版本号是不是对的 DOSFLASH要V1.3

guanqq_64

G33整合芯片组支持Yorkfield、Wolfdale处理器，支持Core 2 Duo、1333MHz FSBQuad Extreme处理器。G33整合芯片组支持DDR2 800，DDR3 1066内存，可以和ICH9、ICH9R、ICH9DH南桥芯片搭配。目前尚没有G33整合芯片组当中图形核心更多细节，但是其图形性能将强于G965芯片组。

既然可以使用ICH9、ICH9R、ICH9DH南桥芯片搭配,那么能刷的机会就不大了....

hs987654321

主板不支持的话，买个VIA的SATA卡就行了