救命啊，升级成功却该了机了。

显示全部楼层 · 发表于 2013-9-10 21:46 · 云南

本帖最后由 konic 于 2013-9-10 21:54 编辑

9.6A 4G版16203 先升DL3.08 后用XeBuild_QuickUpdate~XPG~升级，提示成功，却再也开不了机了

对了，可以进XELL，求修复办法。

显示如下内容：

E:\360\Share\XeBuild_QuickUpdate~XPG~\XeBuild 1.08>xebuild update -f 16537
---------------------------------------------------------------
   xeBuild v1.07.632
---------------------------------------------------------------
---- { Update Mode } ----
started, watching network for xbox...success, found xbox beacon at 192.168.1.7
connected to Corona with updsvr version 1 (peek version 2)

***** ERROR: fcrt.bin not found, keyvault has this file flagged as required but
it's being skipped *****
         note - on hacked images a nofcrt patch WILL NOT allow the drive to
function
         but should allow the machine to boot normally
sending flash data to console...
file sent OK, awaiting result...success!
Completed in 14s
loading avatar data...
success!
Formatting HDD partition...
success!
Sending avatar files to HDD partition...
success! Avatar data is successfully sent to the console!
Completed in 22s
sending reboot command...OK
16537_g2_corona4g.bin image built, info:
---------------------------------------------------------------
Kernel : 2.0.16537.0
Console : Corona
NAND size : 48MiB MMC (system only)
Build    : Glitch (v2)
Xell    : power on console with console eject button
Serial : 5274
ConsoleId : 33
MoboSerial: 7910
Mfg Date  : 11/08/2011
CPU Key : 9B78
1BL Key : DD8
DVD Key : 4E05D
CF LDV : 4
KV type : type2 (hashed - Good! Signature is valid.)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------

press <enter> to quit...

雪月华 · 发表于 2013-9-10 21:48 · 天津

同情一下,看来要找JS拆机了,任何升级都有风险

显示全部楼层 · 发表于 2013-9-10 22:17 · 云南

请教应该怎么样修复,可以进XELL ,CPU key也能显示

雪人 · 发表于 2013-9-11 09:45 · 云南

这就是最顶上提示的“升级有风险”，等高人达救或送JS了

违规昵称828907 · 发表于 2013-9-11 16:13 · 上海

建议用xb2.091重新合成一遍固件手动刷一次看看

		自动登录	找回密码
密码			注册

[求助] 救命啊，升级成功却该了机了。