ExecFTP的问题(问题已解决）

leonwu

这是外国玩家用ExecFTP往ps2硬盘传文件的方法：
here's my mini-guide for playing PGEN from the hdd, and of course roms from the HDD too.

step 1) install pgen with winhiip, i've attached an .nrg image file. i dont remember if winhiip will let you install .nrg's, if not mount with daemon and install from cd-rom. (id = PGEN_12.ELF) by the way, this is the newest pgen, i got it from codejunkies, i just put the elf in to an old disc image of pgen.

step 2) use dsm hdd tool and create a partition on your hdd called "PGEN", i made mine 128mb, you can make yours whatever size you need to fit all your roms.

step 3) fire up execftps, connect to your ps2 with flashfxp, once connected press "CTRL + R" it will come up with a dialogue box, put this in there "SITE MNT /pfs/0/ hdd:+PGEN" (no quotes), it should say it successfully mounted. go in to "pfs", then go in to "0", transfer all of your roms.

step 4) fire up hdloader, run pgen, check out your rom list... in addition to cd-rom, memory card 1, memory card 2, pendrive, there is the very very sexy "PGEN".. highlight her & press X.. there's all your roms  

step 5) play genesis til you vomit.
我照他的方法做，可是在flashfxp中只能找到记忆卡的文件列表hdd中的文件列表就没有！怎么才能把hdd中的文件列表弄出.

minamoto

关键是第3步中的"SITE MNT /pfs/0/ hdd:+PGEN"命令。
你需要手动在flashfxp输入，以便flashfxp建立映射。否则再默认状态下是无法访问硬盘分区的。

leonwu

这步我也做了不过弄不成功，每次都是500错误！

浪魂

use dsm hdd tool and create a partition on your hdd called "PGEN"
请问楼主用dsm hdd tool建了一个名叫"PGEN"的分区了吗?

leonwu

下面是引用浪魂于2004-12-18 23:25发表的:
use dsm hdd tool and create a partition on your hdd called "PGEN"
请问楼主用dsm hdd tool建了一个名叫"PGEN"的分区了吗?

这个分区也建立了，我用menu从记忆卡转了个游戏进去，顺利游戏！

浪魂

问下
PGEN有4个选项(cd-rom, memory card 1, memory card 2, pendrive)
弄好后进入哪个?cd-rom?

leonwu

看你的rom放在这cd-rom, memory card 1, memory card 2, pendrive其中的那一个！然后选有rom的那个设备读取它！

浪魂

不是的,我是问,哪个是读取硬盘里的ROM

leonwu

你在硬盘建立分区后才能看到硬盘的读取项

浪魂

再问个问题,打了48BIT补丁的dsm hdd tool能不能用来管理24BIT的硬盘?