- 精华
- 0
- 帖子
- 398
- 威望
- 0 点
- 积分
- 419 点
- 种子
- 0 点
- 注册时间
- 2010-5-7
- 最后登录
- 2022-12-24
|
发表于 2010-7-9 10:30 · 美国
|
显示全部楼层
希望下面的信息对你有帮助,先从cpu和其电源方面找原因
E-Code / Secondary Error code: E02 (No Audio/Video) / 0002
Known fixes:
1) Scan the mainboard and make sure that there is nothing that might short something out, like metal chipping, components, that moved out of place while reflowing, etc. - Especially in the CPU area
3) Replace MOSFETs and regulators that are known to cause it if they were blown
4) Check if the standby voltages are existent, if they are not at a certain area replace the parts in the area which are likely to be defective.
5) Reflow the CPU
6) X-Clamp replacement
Related Errors:
No Related Errors available!
Description:
This error code is caused by a cold solder joint under the CPU or by a problem with the way it is powered(blown mosfet, capacitor or a short)
According to xbox-scene it is also a problem with the ethernet chip but there arent any references for that.
Comments for this Error code:
babyface015 on 2010-03-23 19:17:29 :
I had this problem with mine xbox, and i solved this problem by just adding some
thermal compount onder the CPU, i don't know if this always solves this
problem
killrhedake on 2010-01-07 23:28:56 :
This also occurs when the washers used in an X-clamp mod are too large. It
causes a bridge between the GPU and CPU heatsink. Using plastic washers or
reverting to the stock x-clamps will combat this error. |
|