关于多屏幕设置说明...一般人儿就别想了

newtype_perz

Update 1.06 has bring one long-awaited option - multiscreen support.

Here is the official guide for setup - maximum of 5 monitors for 170 degree confirmed.

What is the Multi-monitor feature?
The multi-monitor feature allows you to display the race screen of Gran Turismo 5 on a wide display environment connecting multiple monitors together.

What is required to use the multi-monitor feature?
To use the multi-monitor feature, you need the same number of PS3™ units and copy of Gran Turismo 5 as the number of monitors. All PS3™ systems running Gran Turismo 5 must be updated to the latest version of the game. The PS3™ systems that run the multi-monitor setup must be connected through LAN, connected together through a high speed switching hub.

* This feature only connects the monitor viewing fields horizontally, and does not expand the field of vision vertically. Also, the number of simultaneous monitors that may be used is either 3 or 5. See below for additional details.

* Some features such as tracks created in Course Maker, 2P Split Screen racing, and B-Spec are not compatible with the multi-monitor feature.

Overview of Multi-monitor Feature Options
To enable the multi-monitor feature, set the Multi-monitor option in [Option] - [Devices] - [Multi-monitor].

There are three Multi-monitor Enabled Modes in the multi-monitor option.
- OFF
- Server
- Client

When a Multi-monitor Enabled Mode is selected, individual setting items will be displayed.

* When OFF is selected, the multi-monitor feature is disabled. The other modes are explained hereafter.


[Server] Multi-Monitor Enabled Mode
This will set the PS3™ to operate as the multi-monitor server, or master unit, to which client PS3™ systems can connect to.

Of the PS3™ systems that will be a part of the multi-monitor setup, set one PS3 to the server setting.
Avoid running in the server mode when you are not using the multi-monitor feature.

Current IP Address
This shows the IP address of the current PS3™ that will be used as a server.
Set the [Server IP Address Setting] field of client PS3™s to this address to ensure a proper connection.

Layout
Specifies the screen layout. 3x1 means 3 screens wide horizontally.
The server will always be the center screen of the multiple monitors.

Monitor Frame Border
This specifies the width of the physical frame surrounding the perimeter of your monitors.
This is specified by the percentage of the width of the monitor frame in relation to the width of the screen itself.
For example if the screen width is 50cm, and the total size of the monitor including the frame is 60cm, it will be 20% ((60-50)/50x100=20%).

Angle of Screen Curvature
This specifies the angle formed by the left and right monitors when you angle them towards the driver.
For example, if you have a setup as shown in Fig. A, you would set the field to 80.
*See additional explanation at bottom of page



Adjust Screen Angle
Adjusts the angle of view. Specified by a ratio to the standard vertical field angle of 52 degrees.
*See additional explanation at bottom of page

[Client] Multi-Monitor Enabled Mode
This will set the PS3™ to operate as a client to the multi-monitor server PS3™.
The PS3™ and monitor will display a race screen synchronized with the specified multi-monitor server.

Initiate Multi-Monitor Client
Pressing this button will start the multi-monitor client mode and go into standby.
The multi-monitor client mode can be exited by pressing the cancel button.

Server IP Address
Specifies the IP address of the multi-monitor server PS3 to connect to.

Monitor Number
Sets the screen position of this PS3™ monitor in the monitor layout. The left most screen will be number 1.

Use Server Monitor Settings
Sets whether or not to copy the layout, frame width, screen panel angle, and field angle adjustments of the server.

Layout
Same as server

Monitor Frame Border
Same as server

Angle of Screen Curvature
Same as server

Adjust Screen Angle
Same as server

Regarding Angle of Screen Curvature and Screen Angle
The vertical field angle of the interior view in Gran Turismo 5 is 52 degrees. On a 16:9 monitor, this equates to a horizontal screen angle of 82 degrees. If the horizontal width of a monitor is 1m, if you view the screen at a distance of 1.15m from the monitor panel, your field of vision will match your field of vision in real life, taking up your full horizontal field of view.

If you want to set up a true to life viewing field, you should set the Angle of Screen Curvature and Screen Angle based on this.

For example when you have 3 monitors, if you set to an Angle of Screen Curvature of 120 degrees, with a Screen Angle value of 69%, it will cover your field of vision all the way to the direct sides, and the view in each monitor will be facing flat towards your viewpoint, providing an image with no distortion.（Fig. B）




其实这一堆话是欧洲GT官方的多屏幕设置说明

里面包含了如何设置系统，5张屏幕和3张屏幕的摆放设置问题

但比较关键的一句话就是

设置多张屏幕，你需要与屏幕数量相同数量的PS3主机和GT5软件

也就是说，5张屏幕你需要5台PS3 和5套GT5
……
一台做主服，其他主机连接到主服


PD又为PS3的销量做贡献了

该用户已被禁言

除了pc的 iracing， rf 之流， 主机多屏幕不都是这样么， gt4， forza 3 都得要三台主机三张盘， 主机只能这样不是什么新鲜事了

吹蛇的印度人

从来就没想过的飘过~

asura12

这有意思么？简直是让人觉得是瞎折腾···

mi_corazon

有总比没有好，一台PS3显示5个Full HD分辨率的GT5画面你觉得有可能么？
我们没这个条件世界上总有牛人有5台PS3 5张盘 5台显示器的

fish1980

刚发售 有个兄弟不是买了 四台机器要搞嘛 。 这会跟新了 他可以搞了。 不知道 他机器还在不。不会都卖了吧。

meowth

坐等五屏五机五碟帝出现

该用户已被禁言

设置多张屏幕，你需要与屏幕数量相同数量的PS3主机和GT5软件

lxfff

要是玩GT的朋友多也有可能办到，机器和碟可以凑齐，就是屏幕比较麻烦，要么大家电脑显示屏差不多大小的凑一下。这个搬动也比较麻烦了……　最多玩个周末了

2988850987

那位兄弟昨天就更新过了。。。