求救，在线等，刷机E64

再临之子

LT升2.0用的买机时给的原始固件，刷好后不显示光驱信息，开机E64，过程如下:
Sending Lite-On-Erase request to port 0xFD00
..............
Drive returned Status 0x7F
....................
Device Intro failed!
Loading firmware file D:\11 在 22 (66e9606c40ff471) 上\10.8\lt%26jf\LTPlus-025-v2.0.bin
MD5 hash:  0264149996f783b54629c1598072e50e
Genuine LT plus v2.0
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS    DG-16D2S        0251]
Firmware is:  LT-Plus 2.0                     
Spoofing Target
DVD Key copied to target
Target is LT - ID strings not copied to Target

Target rev is LT 02510C, serial info not copied

Target f/w saved as: Lite_CFW.bin

Sending Lite-On-Erase request to port 0xFD00
..............
Drive returned Status 0x7F
..........
Serial flash found with Status 0x72
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name:  MXIC(MX25L2005)
Flash Size:  262144 bytes

Getting Status from port 0xFD00
SPi flash found with Status 0x72

Sending Chip Erase to Port 0xFD00
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................

Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write verified OK !

Sending Vendor Outro to port 0xFD00

再临之子

到底是哪步骤出问题？是写入错误还是不能退出V模式？