- 精华
- 2
- 帖子
- 18222
- 威望
- 14 点
- 积分
- 21324 点
- 种子
- 9 点
- 注册时间
- 2005-1-6
- 最后登录
- 2024-10-3
|
发表于 2012-5-13 17:58 · 江苏
|
显示全部楼层
我已经升级到3.0了 下面是我的配置文件 3.0的貌似配置带有描述 我玩FF13自动换盘没问题- ; launch.xex V3.0 config file
- ; parsed by simpleIni http://code.jellycan.com/simpleini/
- ; currently supported devices and paths:
- ; internal hard disk Hdd:\
- ; usb memory stick Usb:\
- ; memory unit Mu:\
- ; USB memory unit UsbMu:\
- ; big block NAND mu FlashMu:\
- ; internal slim 4G mu IntMu:\
- ; CD/DVD Dvd:\ (not recommended to use this one)
- ; buttons can point to any xex, or any CON with default.xex in it on any of the above devices
- ; note that Right Bumper is ALWAYS default to return NXE
- ; if you want to assign an additional one, use the path Sfc:\dash.xex ie:
- ; BUT_A = Sfc:\dash.xex
- ; all comments and fields in this file are optional, you can remove anything you don't need
- ; sorry for any double negatives :p
- ; njoy, cOz
- ; example entry
- ; Default = Hdd:\FreeStyle\default.xex
- [Paths]
- BUT_A =
- BUT_B =
- BUT_X =
- BUT_Y =
- Start =
- Back =
- LBump =
- ; Default is what loads when you hold no buttons
- ; leave this blank if you want NXE as default
- Default = Hdd:\FSD\default.xex
- ; at boot time, default can be overridden based on how the console is turned on
- ; if you start with wired/wireless/IR guide button, this item if existing will be used instead of default
- ; note that the Guide item is ALWAYS overridden by option: remotenxe = true
- Guide =
- ; if you power on with the button on the front of the console, this item will be used instead of default
- Power =
- ; if set, going to system settins from HUD will run this app, override with Right Bumper
- configapp =
- ; by default this only dumps to UART, setting a file here will cause unhandled exception info to be dumped
- ; as text to a file. Same path restraints as the quick launch buttons.
- ; if exchandler is set to false, this option does nothing.
- ; note that this uses the first drive of the class found, so if you use usb: and have more than one usb device
- ; it may wind up on any of the usb devices depending on which was enumerated first. The path for the file is only
- ; checked on boot, so the device must be present at power on and at crash time for this to be effective
- ; ie: dumpfile = Usb:\crashlog.txt
- dumpfile =
- ; example plugin entry
- ; plugin1 = Usb:\plugin\aplugin.xex
- [Plugins]
- plugin1 = Hdd:\FSD\Plugins\xbdm_scse.xex
- plugin2 =
- plugin3 =
- plugin4 =
- plugin5 =
- [Settings]
- ; if true, brining up miniblade in NXE and then pressing Y will cause launch.xex to relaunch for you
- ; note you must release Y button then press desired QuickLaunchButtons after or use default item
- ; if not present default is TRUE
- nxemini = true
- ; if true ping limit will be removed for system link play (thanks FBDev!)
- ; if not present default is FALSE
- pingpatch = true
- ; if true (most) xbla will no longer need yaris patching (thanks mojobojo!)
- ; if not present default is FALSE
- contpatch = true
- ; Normally when a fatal error occurs the xbox will just freeze, setting this to false will cause a reboot or powerdown
- ; setting to TRUE will also disable the unhandled exception filter which tries to intercept recoverable unhandled exceptions with exit to dash
- ; if not present default is FALSE
- fatalfreeze = false
- ; when fatalfreeze is set to false, setting this to true will cause the box to reboot, setting it to false will instead have the box shut down
- ; note that this option does NOTHING when fatalfreeze is set to true
- ; if not present default is FALSE
- fatalreboot = true
- ; setting this to true will cause the box to reboot (soft reboot) the way it was intended to
- ; on jtag ONLY set this to true if using blackaddr's reboot fix for SMC, else on reboot you will get E71 and corrupted dash/video/etc settings
- ; if not present default is TRUE
- safereboot = false
- ; when set to true, it is possible to hold RB when launching a game to have the region that the game gets from xam spoofed
- ; if not present this is set to FALSE
- regionspoof = true
- ; when regionspoof is true, you set your region here in hex preceding the value with 0x, for examle devkit would be region = 0x7fff
- ; if not present but regionspoof is set to true, this is set to 0x7FFF
- region = 0x7fff
- ; when set to false, ejecting a dvd video or game returns you to your default item, set to true to auto exit to NXE
- ; if not present this is set to FALSE
- dvdexitdash = false
- ; when set to false, using the exit item in an XBLA game returns you to your default item, set to true to exit to NXE arcade menu
- ; if not present this is set to FALSE
- xblaexitdash = false
- ; when set to true, using miniblades system setting options will not exit to NXE
- ; if not present this is set to FALSE
- nosysexit = false
- ; when set to true, miniblades will not appear... ever (requested as child saftey measure)
- ; note that using this option overrides everything in dash launch that relies on miniblade exits to function
- ; if not present this is set to FALSE
- nohud = false
- ; when set to false, xbox will be capable of finding system updaters
- ; if not present this is set to TRUE
- noupdater = true
- ; when set to true, dash launch will put all debug strings out to uart
- ; if not present this is set to FALSE
- debugout = false
- ; when set to false, dash launch will not attempt to handle last chance unhandled exceptions
- ; if set to false, exceptions will also not be dumped to the dumpfile
- ; if not present this is set to TRUE
- exchandler = true
- ; this value sets the number of times that buttons are checked for on bootup, as well as how long it checks for buttons
- ; and thus extends the length of time the boot animation will be displayed onscreen
- ; 0x5A is approximately 6s window for button detection, 0x2A approximately 2s - if set too short auto profile login breaks
- ; if set too long other wonky things happen
- ; note this value is interpreted as hexidecimal when preceded with 0x, valid range is 0 to 0xFFFFFFFF
- ; if not set this value will be put to 0x2A (42)
- bootdelay = 42
- ; if set to true, this will block the console from resolving LIVE related dns
- ; if not set this value will be TRUE
- liveblock = true
- ; if liveblock is set to true, this will block the console from resolving all MS related dns
- ; setting this to TRUE will also block apps like freestyle from accessing things like cover images
- ; *** note that if NO INI is present for launch.xex, this is set to TRUE
- ; if not set this value will be FALSE
- livestrong = false
- ; when set to TRUE the X (guide) and power button on IR remotes will cause the xbox to boot to NXE instead of default item
- ; note that powering on with the windows/start button automatically goes to NXE's media center now regardless of how this is set
- ; if not set this value will be FALSE
- remotenxe = true
- ; when set to TRUE all USB drives will be polled at hddtimer intervals for the file "alive.txt" in their root
- ; if the file exists, it will be recreated and 16 random bytes written to it on each poll which should keep drives from spinning down
- ; if not set this value will be FALSE
- hddalive = false
- ; in seconds, the interval between when USB devices will be polled for "alive.txt" file
- ; if not set and hddalive is set to TRUE this value will be 210
- hddtimer = 210
- ; attempts to disable popups related to signing in, like "live is blocked" and similar
- ; !! WARNING OTHER THINGS DO USE THIS DIALOG AND DETECTING THAT IT'S A LOGIN DIALOG MAY NOT BE PERFECT !!
- ; !! to sign into live profiles other than auto signing on boot you MUST accept the 'check live for updates' dialog BEFORE enabling this option !!
- ; if not set this value will be FALSE
- signnotice = false
- ; when you hold guide button to shut down xbox, normally the 'cancel' option is selected
- ; setting this to TRUE will cause the shutdown option to be auto selected instead
- ; !! WARNING OTHER THINGS DO USE THIS DIALOG AND DETECTING THAT IT'S SHUTDOWN DIALOG MAY NOT BE PERFECT !!
- ; if not set this value will be FALSE
- autoshut = false
- ; when you hold guide button to shut down xbox, normally a dialog comes up
- ; setting this to TRUE will cause the console to shutdown instead of show a dialog
- ; !! WARNING OTHER THINGS DO USE THIS DIALOG AND DETECTING THAT IT'S SHUTDOWN DIALOG MAY NOT BE PERFECT !!
- ; if not set this value will be FALSE
- autooff = false
- ; 14699+ has native http functions, but you are forced to be logged into use them
- ; this patch removes that restriction, set to false to disable it if you have any problems
- ; if not set this value will be TRUE
- xhttp = true
- ; when tempbcast is set to TRUE the raw temp data from smc will be broadcast over UDP at temptime second
- ; intervals on port tempport
- ; if not set this value will be FALSE
- tempbcast = false
- ; if not set this value will be 10
- temptime = 10
- ; if not set this value will be 7030
- tempport = 7030
- ; when set to TRUE all titles will have the insecure socket priveledge
- ; if not set this value will be FALSE
- sockpatch = false
- ; when set to TRUE dash launch will not erase launchdata before launching a quick launch item
- ; if not set this value will be FALSE
- passlaunch = false
- ; when set to TRUE various functions will be spoofed to make firmware think it's connected to LIVE
- ; this does not compensate for the fact that it cannot contact LIVE servers
- ; if not set this value will be FALSE
- fakelive = false
- ; when set to TRUE network/cloud storage options should not show up in disk dialogs
- ; if not set this value will be TRUE
- nonetstore = true
|
|
川公网安备 51019002005286号
楼主
发表于 2012-5-13 15:07 · 山东
