x360Glitchip v2.1 On Corona Xbox 360 Boards - It's done

qwe110121120 · 发表于 2012-7-11 20:32 · 江苏

本帖最后由 qwe110121120 于 2012-7-11 20:35 编辑

One more time, you can see that as usualy we were right, and we NEVER announce wrong thing like some others teams to make more profit.

And so we confirm you today, that our chip is working perfect on Corona Boards (16Mo Hynix model).

You don't need any modification, addon, resistor, or any thing more. The x360Glitchip v2.1 is Fully Corona Compatible as is.

Moreover, we got good boot times without any specific optimisation. Simply use the same installation setup as a Trinity and enjoy your glitched Corona.

视频在***上能找到
另外相应软件跟上

360gcProg v1.6 : Adding the 6 Corona Timing

Monday, 09 July 2012 00:00

Here today a new version of our great software allowing you to flash Glitch Chip and CPLD Boards.

Indeed, This one is now in version 1.6 and bringing to you the Corona Timings. (Thanks to TX and Squirt team for these timings)

racicow · 发表于 2012-7-11 21:02 · 美国

The x360Glitchip v2.1 is Fully Corona Compatible as is.

沙发侍候，准备看电影。

swizard · 发表于 2012-7-11 21:23 · 北京

4G 也可以自制了？

wangluoxi · 发表于 2012-7-12 11:57 · 河北

不错。烧写脉冲版可以用这个软件来，省得写批处理了。

J.βαγ · 发表于 2012-7-12 12:12 · 广东

And so we confirm you today, that our chip is working perfect on Corona Boards (16Mo Hynix model).
4g还是没希望

我是谁新手 · 发表于 2012-7-12 12:13 · 北京

wangluoxi 发表于 2012-7-12 11:57
不错。烧写脉冲版可以用这个软件来，省得写批处理了。

为什么不支持我的芯片？

		自动登录	找回密码
密码			注册

[破解] x360Glitchip v2.1 On Corona Xbox 360 Boards - It's done