- 精华
- 0
- 帖子
- 654
- 威望
- 0 点
- 积分
- 662 点
- 种子
- 0 点
- 注册时间
- 2005-2-26
- 最后登录
- 2013-11-14
|
发表于 2012-7-25 12:15 · 上海
|
显示全部楼层
本帖最后由 redstorm 于 2012-7-25 12:17 编辑
joem0 发表于 2012-7-25 11:59
文件倒是好弄,都找全了,关键是现在dump_rootkey部分还没编译完全,出现错误如下,和人交流后得知同样的情 ...
如果你在CMD模式下操作,先进目录,操作如下
c:\>cd dump_rootkey
c:\dump_rootkey>dump_rootkey.exe 192.168.0.7
[INFO] Connecting to '192.168.0.7'...ok.
[INFO] Ping...ok.
[INFO] VAS ID = 0x000000000000000B
[INFO] map_lpar_memory_region(data): res = 0
[INFO] Copying files out...done.
[INFO] Constructing SPE...done. (res = 0)
[INFO] priv2 0x00004C00012E0000
[INFO] problem 0x00004C00012C0000
[INFO] LS 0x00004C0001280000
[INFO] shadow 0x0000300000026000
[INFO] ID 0x0000000000000002
[INFO] Setting up SPE...done.
[INFO] map_lpar_memory_region(shadow) : res = 0
[INFO] map_lpar_memory_region(problem) : res = 0
[INFO] map_lpar_memory_region(priv2) : res = 0
[INFO] map_lpar_memory_region(ls) : res = 0
[INFO] set_spe_privilege_state_area_1_register : res = 0
[INFO] Starting SPE in isolation mode...done.
[INFO] Interrupt status (2, application) = 0x0000000000000011
[INFO] -> SPU mailbox threshold interrupt
[INFO] -> mailbox interrupt
[INFO] Mailbox value = 1
[INFO] -> Dumper loaded.
[INFO] Transferring eid_root_key to buffer...finished.
[INFO] Dumping eid_root_key...done.
[INFO] SPU status = 0x00000081
[INFO] Requesting SPE isolation exit and stop.
[INFO] Destructing SPE...done.
[INFO] Press any key to exit...
还有MAIN.CPP的243行要改成spu_slb_set_entry(&ctxt, priv2_addr, 0, 0x8000000018000000ULL, 0x0000800000001400ULL) |
|