- 精华
- 0
- 帖子
- 3430
- 威望
- 0 点
- 积分
- 3787 点
- 种子
- 92 点
- 注册时间
- 2005-10-4
- 最后登录
- 2025-1-2
|
本帖最后由 chenke 于 2013-3-4 22:34 编辑
前提是你得有台带并口的PS机（7500系（含）之前），原理是将原来插并口的金手指卡再改造，售价59.95刀......
Designed for serious PlayStation developers, programmers and game enthusiasts.
* From PSXDEV.NET *
Here is the USB Comms Link that the scene has been needing and wanting for such a long, long time...
The old work log for the PSX Blaster SIO Comms Link has been put away for safe keeping.
What is it?
This is basically just an Xplorer cartridge, but instead of using the LPT (parallel) port to connect to the PC, you can use USB at a speed of 1 Megabyte per second. This will let your PC communicate with your PSX. So, you can upload your program (.exe) into the PSX's RAM, and let it execute. This is exactly how the original Psy-Q blue dongle worked seen here. Overall, it is a development tool to make PSX games, and without it, you will not be able to run your games, code or programs on a real PSX.
Features:
- Extremely fast USB link from the PC to the PSX at 1 Megabyte (1024 KB) per second,
- Supports VRAM dumping and RAM dumping,
- Supports RAM editing / memory snooping,
- Supports virtual hard disk imaging (IE: you can stream files from your PC HDD over USB instead of the PSX CD-ROM)
[size=90%](Notice: Features may change at any given time as the PSX Blaster is still in development)
We will have these ordered soon. Just waiting for the parts in the mail to check the footprints on the board.
They will be ordered as soon as they are checked.
These will be sold on the psxdev.net store (coming soon).
ETA: ? weeks until they arrive at my mailbox.
ETA: ? weeks until they are sold on psxdev.net.
Includes: PSX Blaster, USB cable and the Drivers (all Windows OS's after Windows 95 are supported).
Price: $59.95
[size=90%]If you have donated and supported PSIO, you will receive a discount on the PSX Blaster should you purchase one.
No soldering required. Just plug the PSX Blaster into your PSX's PIO port (we still need to source the 68-pin connectors!), plug it into your PC over the included USB cable, setup the drivers, development environment (IE: Psy-Q) and you're ready to start uploading your games and programs to the PlayStation 1!
Version 1.0 PCB Dimensions: 70mm x 55mm.
We plan for Version 1.1 to be 50mm in height by moving some IC's to the back, changing the regulator and changing the 128 KB DIP Flash to SMD or PLCC.
 |
|
川公网安备 51019002005286号
楼主
发表于 2013-3-4 22:56 · 广西
