任天堂对Joy-Con手柄延迟、无反应问题作出回应

wgic

这个公司还不破产真是奇迹。完全和消费者脱节

SkylarGrey

本身就是一台让你多到户外游玩的便携式主机

史莱姆KING

bxb333 发表于 2017-3-4 21:31
无线路由器的2.4G信号容易被USB3.0干扰，估计switch手柄采用的是2.4G信号

不用估计，本身就是

拆机的视频中就已经有标识

dorawmon

现在知道5G信号的好处了

下载王

bxb333 发表于 2017-3-4 21:31
无线路由器的2.4G信号容易被USB3.0干扰，估计switch手柄采用的是2.4G信号

请教个问题 usb3.0会产生干扰的无线信号吗？求科普一下

bbpoo

史莱姆KING 发表于 2017-3-5 08:37
不用估计，本身就是

拆机的视频中就已经有标识

这是右手柄的，通过MMCX连接一个独立的PCB天线；但是左手柄没有，可能用了SMT的陶瓷天线。

anara

好一个机翻。。
和原文意思差了快十万八千里。。

Try these steps:

Ensure your console has the latest system update.
Ensure the Joy-Con controllers are charged. How to
Try to decrease the distance between the Joy-Con and the Nintendo Switch console.
Ensure that the Nintendo Switch console is placed to minimize interference with the Joy-Con. It is best if the Nintendo Switch console is placed out in the open and that it is not:
Behind a TV
Near an aquarium
Placed in or under a metal object
Pressed against a large amount of wires and cords
Within three to four feet of another wireless device, such as a wireless speaker or a wireless access point.
Check for possible sources of interference and turn them off. Interference can be caused by devices, such as:
Laptops, tablets, etc.
Wireless headsets
Wireless printers
Microwaves
Wireless speakers
Cordless phones
USB 3.0-compatible devices such as hard drives, thumb drives, LAN adapters, etc.
In most cases it will be enough to move these devices three to four feet away from the Nintendo Switch console and/or Joy-Con controllers. However, if you continue to experience this issue, please power these devices off while using the Nintendo Switch console.

akira905

等后续报道，，，，

luster

若闲 发表于 2017-3-4 21:28
首日更新后我的机器没有问题，试验发现穿过3，4个身体不在话下。

从哪里穿过！？

関智一

现在谁没手机。。。有手机干扰就不能玩？？？还能不能玩？