- 精华
- 0
- 帖子
- 6793
- 威望
- 0 点
- 积分
- 6937 点
- 种子
- 593 点
- 注册时间
- 2012-5-29
- 最后登录
- 2024-11-23
|
楼主 |
发表于 2019-12-15 16:09 · 广西
|
显示全部楼层
本帖最后由 powerh3 于 2019-12-29 17:57 编辑
pixel69玩友：
Hi folks
Here my experience with 2 APU :
==> A6-1450 (Radeon HD 8250) : work fine but the APU (1GHz) is to slow to play games for machines >= 32bits
==> A10-9700E (Radeon R7) : working only with progressive resolution
The PC is a HP ELITEDESK 705 G3 DT MINI A10-9700E 8GB 256GB R7E
2 display port and 1 VGA
Until the last version of crtemudriver (beta 15), i was not able to install the driver, the installation stopped with the message saying there is no driver info
Now with beta 15 the installation work but i can't have interlaced resolution, only the progressives one
A10-9700E实现低解240p了，不过没有interlace隔行模式哦。。。28nm的APU也把隔行模式省去了？？
也许是主板自带的VGA口，用的数模转换芯片 屏蔽了隔行模式，也说不准哦。。
这台小主机，估计也是DP转的VGA。。
台机AM4接口。
A6-1450也是28nm的APU啊，好像可以隔行啊（pixel69玩友没提到）。。BGA769 (FT3)接口，移动版APU哦。。
CRT Emudriver in AMD APU? (sorry if has been asked before)
http://forum.arcadecontrols.com/index.php/topic,152655.0.html
naoto.awai玩友的：
Hi
I'd like to report my successful experience with the following APU:
AMD A6 - 6400K (Radeon HD 8470D integrated)
connected to a TV PAL - RGB with a cable RGB-SCART VGA (from retrocables.es)
SO: windows 7 pro
Calamity drivers:
- Download CRT Emudriver & CRT Tools 2.0 beta 15 (Crimson 16.2.1 non-GCN* cards) for Windows 7/8/10 64-bits
Frontend:
Attract Mode 2.5.1
I had to use 640 x 486 @15 khz (instead of 640 x 480 @15 khz) as explained by calamity here:
http://geedorah.com/eiusdemmodi/forum/viewtopic.php?id=416
A6 - 6400K 是32nm的APU，支持486i ？？台机FM2接口。。
mghty玩友：
提供一个，具体还有很多信息，看该贴吧。。。
SUCCESS! :applaud: ...and on friday the 13th of all days! >:D
- - - - - - - - -
PC: HP Compaq Pro 6305 - AMD A4 5300B 3.4GHz - Radeon H7480D - Windows 10 Pro
CRT Emudriver: - 2.0 beta 15 (Crimson 16.2.1 non-GCN* cards)
CRT TV: Panasonic TX-G10
Connection: RetroCables (Spain) VGA-to-RGB(Scart) Cable
- - - - - - - - -
这个是32nm的APU。。台机FM2接口。。
用了一根VGA到Scart的线接的CRT设备，是RGB信号的。。。
Substring玩友 给了mghty玩友帮助，他们选择的VGA到Scart的线，是特殊的，带USB线。可以将USB接入PC等设备后，提供足够的电力，否则CRT屏幕会非常暗。。
Yes sir you must plug the USB cable, or the screen will be pretty dark. That's part of the scart specs.
Talking about the cable, the USB is the only flaw of this cable : the plastic surrounding the metal connector often slides off. It happens that when I want to unplug the USB connector, I simply slide the plastic part
涉及到一些薄型的品牌小主机了，看1152楼吧。。
再加一个，是笔记本了，有核显和独显两个GPU的：
Awesome!, ..can now confirm i've also had success with the laptop i was struggling with...
(DELL INSPIRON M5110 (Laptop), WINDOWS 10, 1.90GHz AMD A4-3300, 8GB RAM - DUAL CORE CPU & DUAL GRAPHICS RADEON HD 6480G & RADEON HD 7400M)
- CRT Emudriver & CRT Tools 2.0 beta 15 (Catalyst 12.6) for Windows 7/8/10 64-bits
CRT TV: Panasonic TX-G10
Connection: RetroCables (Spain) VGA-to-RGB(Scart) Cable
For success with this one i needed the laptop to have 'dual graphics' enabled (which seemed odd to me at first because i thought dual graphics would cause problems with CRT Emudriver & VMMaker).
During the 'installing the driver' part, CRT Emudriver installed perfectly only when i selected RADEON HD 7400M, but from that point onwards it was just the RADEON HD 6480G that was targeted/effective.
I prob didn't explain that very well, but long story short, for me it was a case of targeting the 7400M first, and then only targeting the 6480G.
The other struggle i had was with VMMaker.... specifically the part when you install the modes... i would get lines of 'Rejected by Driver' no matter what i tried. It sucked because i knew i was so close to success.
I finally tried changing the output of my laptop to second screen only ...and success!
Thankyou Calamity and also Buttersoft & Substring for your help guys
1197、1198、1199楼有相关硬件分析。。。 |
|
楼主: powerh3
川公网安备 51019002005286号
发表于 2019-12-24 08:58 · 上海
