- 精华
- 0
- 帖子
- 6793
- 威望
- 0 点
- 积分
- 6937 点
- 种子
- 593 点
- 注册时间
- 2012-5-29
- 最后登录
- 2024-11-23
|
楼主 |
发表于 2018-6-29 20:25 · 广西
|
显示全部楼层
本帖最后由 powerh3 于 2018-6-30 19:08 编辑
豆豆08 发表于 2018-6-27 18:23
我自己再研究下找下原因 假如成功了我再来告诉你什么原因
系统会自动安装适用显卡的自带驱动文件(或者很顽固的难以卸载的某些AMD官方驱动),进入操作系统后,一直占用这些文件,有时会系统保护而无法被低解驱动文件替换掉,从而安装失败。
C大说若遇到很棘手的显卡驱动安装问题时,就得完全卸载掉所有GPU相关驱动文件,他是用设备管理器一个个删,系统完全认不出该显卡时,再装一遍低解驱动。
安装低解240p驱动不成功或有问题,可以进 安全模式 完全卸载系统正在使用的显卡驱动版本,然后在 安全模式 安装一遍低解240p驱动。。。
A BSOD on startup may happen for several reasons: BSOD 就是系统蓝屏。。虽然是针对Win10说的,其他版本Win也有参考价值。
- A genuine bug in the driver (probably caused by the patch). Unlikely, otherwise it would have crashed before.
- Test mode turned off with patched drivers. This is typical of Windows 10, so I think this is probably the issue.
So, do you think it's possible that test mode might have been turned off by you accidentaly or by the OS itself? Has the OS applied any updates in between?
Regardless, when Windows 10 registers a BSOD on a device driver, it automatically disables it and installs a previous driver that is known to work if it finds one in its driver store. I don't know if this behaviour can be disabled, but what I'd try is to uninstall all drivers associated with the gpu, one by one, from the device manager, until the Windows does not recognize the card at all. Then install CRT Emudriver.
系统升级也有可能把之前安装成功的低解驱动文件替换掉,变成Win官方的驱动,然后出现蓝屏或认不出驱动的情况。。
C大说Win10还会把发生过蓝屏的信息注册到驱动文件中,自动关闭发生蓝屏的驱动文件,然后替换成之前成功过的 系统自代驱动库 里的 显卡驱动文件。他不知如何关闭这个系统行为。他是用device manager设备管理器一个个删,系统完全认不出该显卡时,再装一遍低解驱动。
|
|