- 精华
- 1
- 帖子
- 34775
- 威望
- 21 点
- 积分
- 37060 点
- 种子
- 389 点
- 注册时间
- 2005-8-11
- 最后登录
- 2024-11-15
|
楼主 |
发表于 2011-9-7 19:53 · 福建
|
显示全部楼层
本帖最后由 我为eg狂 于 2011-9-7 19:55 编辑
PS2ESDL不支持SMB模式,显然指的是在移动存储设备下建立啦。
分享一些使用心得:
①omarrana同学:格式化时簇大小选择32KB可以稍许提升读取速度;
②ktwister同学的iLink模式支持系统:
所采用的移动存储设备:Seagate Freeagent Xtreme(接口包含eSata/FW/USB2.0,容量1.5TB)
分区格式:FAT32(簇大小为16KB)
分区及格式化软件:Paragon Partition Manager
分区大小:998GB(当>1000GB时识别不到游戏列表)
SP193同学建议格式化时选择簇大小为32KB试试,不过ktwister同学说尝试多款软件都会导致软件在格式化1TB以上容量时报错。
原文:
I can't with the Paragon formatting software. It is fixed at 16kb.
and ALL of the other partitioning software I have tested and used with this emulator does not work with formatting bigger drives, or it will not make larger size partitions with FAT32.
That's why I asked initially if you used some kind of special fat32 formatting software because every piece of software I have used so far that will format with a 32kb cluster will either error out at the creation of a larger partition such as 1.5tb, or will simply not allow creation of certain size partitions with FAT32.
All of the formatting software that I use to format larger fat32 partitions such as 2tb or bigger errors out with the Seagate Freeagent XTreme. The XTreme is unique in the fact that it wouldn't work with any of the formatting software I use on other model Seagate HDD's with large FAT32 partitions.
I understand about what you are saying about 32kb clusters, but not understanding why would it cause an overflow only AFTer the partition reached 1tb exactly everytime ?
The drive worked fine on all the partitions sized at 393GB, 500GB, 885GB, and 998GB.
I formatted it several different times over the 1000GB mark, and every time it caused the game list to not show up even though the drive appeared to be running fine.
If I can get my Flex series FW base back anytime soon, I'll try formatting with that series.
|
|