- 精华
- 0
- 帖子
- 103
- 威望
- 0 点
- 积分
- 114 点
- 种子
- 0 点
- 注册时间
- 2003-10-11
- 最后登录
- 2013-6-23
|
发表于 2005-6-5 02:39 · 广东
|
显示全部楼层
想询问:酒里***
你好,我是吉米数码娱乐商城的linjimmy
我得知阁下在我站购买了DMS4 PRO ***
但是我站有些顾客不会使用DMS4 PRO的一些功能
请问你知道DMS4 有没有工程模式就是设置"Normal", "Fast Boot", "Dev.olution 1"and "Dev.olution 2" 在开机的时候自动引导记忆卡上的软件比如HDDLOAD之类。
以下是DMS3 的***工程模式,你帮我分析一下DMS4 要怎么设置才可以进入
To enter the configuration menu hold down the shoulder buttons
(L1 + L2 + R1 + R2) on controller 1 as the PS2 is booting. Once
in the configuration menu you can enable/disable settings, select the
default boot mode and see various version data such as your PS2 version,
flash version etc.
Default boot mode can be set to "Normal", "Fast Boot", "Dev.olution 1"
and "Dev.olution 2". If you are not holding down a button on controller
1 when your PS2 is booting to select the boot mode, then DMS3 will use
the default boot mode which has been set by the configuration menu
(if there is no memory card in slot 1 then DMS3 will use Normal boot).
非常感谢~ |
|