[询问]怎样判断电视是否支持全色域?

该用户已被禁言

我打开全色域以后怎么感觉整个屏幕变暗了呢?

刚才研究了一下,参考了一下英文论坛.7楼有个方法可以测试自己的电视能不能支持RGB FULL RANGE的.假如支持的话,大家可以试试8楼有个方法教大家把电视亮度和对比度调到"最佳"效果.其实也不用跟着调啦,建议确定电视支持后,进入忍龙DEMO或者正式版以后再调到自己觉得满意的效果..

该用户已被禁言

用DLP的, 打开后就觉得蒙上了一层白色的纱, 感觉还是原来limit的好^_^

该用户已被禁言

我是用的LCD,也有这种感觉.不过好像进入游戏以后颜色对比更好了

Jeff_Chen

这个东西对HDMI转DVI接显示器的人比较有用，普通用户没用。

joeking

下面是引用Jeff_Chen于2007-06-15 20:04发表的:
这个东西对HDMI转DVI接显示器的人比较有用，普通用户没用。

全色域不是SONY的X.V.COLOUR吗

该用户已被禁言

晕,那就是说只有索尼的X,Y COLOUR电视才能全开啊?

joewen

HDMI1.3的有用。。。。。。

该用户已被禁言

找到测试方法了,大家可以去试试
http://www.neogaf.com/forum/show ... &postcount=1450

该用户已被禁言

这是英文原文教假如电视支持,怎么设置电视亮度和对比度才能到最佳效果

More help for contrast and brightness se
Written by D. Fortune, on 26-05-2007 23:50
You need to re-adjust your brightness and contrast settings once you've switched to Full RGB. To borrow an image kindly posted earlier, you need a nice black level image to calibrate brightness to, and a while level image to calibrate your contrast to:




Put these two images in your photos folder on the PS3. Start by pushing your brightness right up, then slowly bring it down until the upper left near black square barely becomes visible. It may take a few seconds for you to tell if it's actually visible or not, but you want it to be on the threshold, so one notch less and it's completely gone. Once that is set, you should switch to the white image and adjust the contrast until the upper left near white square just becomes indistinguishable from the white background.

These images are for a full 0-255 RGB range so don't use them for recalibrating back to limited RGB. For that you'll need:




These are the same images but the range clipped to 16-235 RGB.

D. Fortune (dredit Mmmkay)

520561314

请问铁拳收费下载不是可以3次嘛。那就是可以共享2次罗？如果谁有共享的话我给钱。也可以找人一起共享。毕竟能省就省嘛。我的电话13701665669。我是上海的。谢谢